Hello, On 05.07.2018 14:34, Jeremy Fields wrote:
Sure - I've tried a few different combinations, but the latest Genode 18.5 used seL4 9.0.1. I'm attempting to use this on an x86 machine that has a Xeon 1607 and a dedicated GPU. The thread I referenced in my initial post implied that UEFI might be an issue, but I've tried both UEFI and legacy boots without success. I tried using/building Genode 17.5 with whatever version of seL4 it acquires, but get the same error. Let me know if there's anything else I can provide
some suggestions from my side. Try to remove the chain bootloader "bender", just to exclude it as potential reason of trouble. In genode/tool/run/boot_dir/sel4 remove the "multiboot2 /boot/bender ..." line and adjust the line below from "module2 /boot/sel4 ..." -> "multiboot2 /boot/sel4 ...". Use some simple scenario for testing, like log.run If the issue persists, you may try to boot Genode/seL4 the Multiboot 1 way instead of Multiboot 2, which however will solely work for BIOS legacy boots (no UEFI). Replace the "multiboot2" and "module2" in genode/tool/run/boot_dir/sel4 with "multiboot" and "module". Cheers, Alex B. -- Alexander Boettcher Genode Labs http://www.genode-labs.com - http://www.genode.org Genode Labs GmbH - Amtsgericht Dresden - HRB 28424 - Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth