Hi Siwei, I have removed libarchive from python2 and installed libarchive-c with python3. seL4Test is up and running. Many thanks. Best, Jacob On Wed, Nov 13, 2019 at 9:19 PM Zhuang, Siwei (Data61, Kensington NSW) < Siwei.Zhuang@data61.csiro.au> wrote:
It looks like either you're using the libarchive in python2 or the package is outdated.
Try something like, pip3 install libarchive --upgrade
You may need to remove the libarchive from python2, although seL4test requires both python2 and 3.
Regards, Siwei
On Wed, 2019-11-13 at 20:26 -0800, Jacob Yu wrote:
Thanks, Siwei.
After I have done a clean build (by removing previous installation in "/opt/riscv"), I am able to enable "multilib" when building "riscv-gnu-toolchain" successfully. I also found out that I needed to build Newlib.
I can now run " ../init-build.sh -DPLATFORM=spike -DRISCV64=TRUE -DSIMULATION=1" in the build directory under seL4Test but still failed in ninja:
[1/20] Generating gen_headers/image_start_addr.h FAILED: elfloader/gen_headers/image_start_addr.h cd /home/webuser/Dev/l4/l4dev/seL4test/cbuild/elfloader && sh -c "/home/webuser/Dev/l4/l4dev/seL4test/tools/seL4/elfloader-tool/../cmake- tool/helpers/shoehorn.py
/home/webuser/Dev/l4/l4dev/seL4test/cbuild/kernel/gen_headers/plat/machine/p
latform_gen.yaml /home/webuser/Dev/l4/l4dev/seL4test/cbuild/elfloader/archive.o >
t_addr.h" Traceback (most recent call last): File "/home/webuser/Dev/l4/l4dev/seL4test/tools/seL4/elfloader-tool/../cmake- tool/helpers/shoehorn.py", line 81, in <module> def get_bytes(entry: libarchive.entry.ArchiveEntry) -> io.BytesIO: AttributeError: module 'libarchive' has no attribute 'entry' ninja: build stopped: subcommand failed.
Thank again for all the help.
Regards,
Jacob
On Tue, Nov 12, 2019 at 4:37 PM Zhuang, Siwei (Data61, Kensington NSW) < Siwei.Zhuang@data61.csiro.au> wrote:
Hi Jacob,
Never had this problem before, so just a blind guess.
As you can build "riscv-pk", you must be using the cross compiler from your previous build(with multilib disabled). Try removing the previous installation in "/opt/riscv", and also do "make clean" to remove all
/home/webuser/Dev/l4/l4dev/seL4test/cbuild/elfloader/gen_headers//image_star the
previous build directories.
I noticed that the log you attached says "Checking whether the C compiler works ... no", have a look at "config.log" to see if there's any useful info.
Also make sure you have enough disk space, my build takes 21GB.
Regards, Siwei
On Tue, 2019-11-12 at 11:31 -0800, Jacob Yu wrote:
Hi
I am able to install & build "riscv-pk" and "riscv-isa-sim", and then try out Spike. Many thank!
./configure --prefix=/opt/riscv --enable-multilib sudo make linux Otherwise, I also tried to enable "multilib" when building "riscv-gnu-toolchain" but with no luck. It complained:
... configure: error: in `/home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux- stage2/riscv64-unknown-linux-gnu/lib32/ilp32/libgomp': configure: error: C compiler cannot create executables
And make failed with:
Makefile:13703: recipe for target 'configure-target-libgomp' failed make[2]: *** [configure-target-libgomp] Error 1
Again, any suggestions?
Regards,
Jacob ============================================================ ... checking for riscv64-unknown-linux-gnu-gcc... /home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux- stage2/./gcc/xgcc
-B/home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux- stage2/./gcc/
-B/opt/riscv/riscv64-unknown-linux-gnu/bin/ -B/opt/riscv/riscv64-unknown-linux-gnu/lib/ -isystem /opt/riscv/riscv64-unknown-linux-gnu/include -isystem /opt/riscv/riscv64-unknown-linux-gnu/sys-include -march=rv32imac -mabi=ilp32
*checking whether the C compiler works... noconfigure: error: in `/home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux- stage2/riscv64-unknown-linux-gnu/lib32/ilp32/libgomp':configure: error: C compiler cannot create executablesSee `config.log' for more details*
*Makefile:13703: recipe for target 'configure-target-libgomp' failedmake[2]: *** [configure-target-libgomp] Error 1* make[2]: Leaving directory '/home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux-stage2' Makefile:951: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/home/webuser/Dev/risc-v/riscv-gnu-toolchain/build-gcc-linux-stage2' Makefile:304: recipe for target 'stamps/build-gcc-linux-stage2' failed make: *** [stamps/build-gcc-linux-stage2] Error 2
On Mon, Nov 11, 2019 at 5:52 PM Zhuang, Siwei (Data61, Kensington NSW) < Siwei.Zhuang@data61.csiro.au> wrote:
No, building riscv-isa-sim alone is sufficient if you only need Spike.
seL4 also generates a script called "simulate" in the your build directory. The script invokes qemu for simulation.
Regards, Siwei
Thanks, Siwei for the info. I'll give it a try.
> Running seL4 no longer requires RISC-V tools. In case you want to use Spike, > I'd suggest building the riscv-isa-sim separately to get the > latest code. Does this require RISC-V tools to build?
Best,
Jacob
On Sun, Nov 10, 2019 at 10:58 PM Zhuang, Siwei (Data61, Kensington NSW) < Siwei.Zhuang@data61.csiro.au> wrote:
> Hi Jacob, > > You need to enable multilib when building "riscv-gnu-toolchain". > > ./configure --prefix=/path-to-install-toolchain --enable-multilib > then > make or make linux > > Running seL4 no longer requires RISC-V tools. In case you want to use > Spike, > I'd suggest building the riscv-isa-sim separately to get the > latest code. > Regards, > Siwei > > On Sun, 2019-11-10 at 15:50 -0800, Jacob Yu wrote: > > Hi > > > > I am trying to build "seL4 tests" for "Spike" platform (the RISC-V > > simulator from UC Berkeley) on Ubuntu 18.04.3 LTS, a 64-bit system. > > First of all, I was able to build RISC-V tools with "build.sh" after > > manually installing "riscv-gnu-toolchain" from GitHub as well as > additional > > python modules (future, ply, protobuf). I then kicked of > "../init-build.sh > > -DPLATFORM=spike -DRISCV64=TRUE -DSIMULATION=1" from local build > directory. > > After that, however, "ninja" command complained about "undefined > reference > > to `__nedf2'". I understand there is no FPU support in "Spike"
On Mon, 2019-11-11 at 17:20 -0800, Jacob Yu wrote: platform
> so > > a need for "soft-float" module. Where should I specify "-lsoft-fp"? > > Any suggestions? > > > > Thanks, > > > > > > Jacob > > _______________________________________________ > > Devel mailing list > > Devel@sel4.systems > > https://sel4.systems/lists/listinfo/devel