Munees, I'm fairly sure that the TX1 can use the UART driver in there, since we have that driver in regression, being tested almost daily on a TX1 board -- that driver is the one used by seL4test on the TX1 in this test here: https://github.com/seL4/sel4test/blob/master/apps/sel4test-tests/src/tests/s... You also asked whether you have to migrate anything to the TX1. To my knowledge, no, because the TX1 is already running in regression internally, and that UART driver I linked you to is used by the TX1 port with no modifications. As for your question about the TX2, I cannot comment on whether or not the TX2 works the same as the TX1 because I have no experience with the TX2, since we do not have this board internally, and because seL4 does not officially support the TX2. If you want to port seL4 to the TX2, it would require some effort in figuring out what the differences between the TX1 and TX2 are, as far as I can tell :) -- Kofi Doku Atuah Kernel engineer DATA61 | CSIRO