To Whom It May Concern: My name is Dan DaCosta and I am working with Rockwell on a smaccms transition project referred to as HTA. The manifest associated with this project can be found here: https://github.com/smaccm/hta This manifest is mostly concerned with targeting the cma34cr board. When building images using a Fedora 26 based OS that relies on gcc 7 the following fault occurs: FAULT HANDLER: data fault from vm.ethdriver.control (ID 0x202) on address
0x1076878, pc = 0x4070d5, fsr = 0x6 FAULT HANDLER: rip = 0x4070d5 FAULT HANDLER: rsp = 0x1076880 FAULT HANDLER: rax = 0 FAULT HANDLER: rbx = 0xe68000 FAULT HANDLER: rcx = 0x8 FAULT HANDLER: rdx = 0x5 FAULT HANDLER: rsi = 0xe61000 FAULT HANDLER: rdi = 0xc FAULT HANDLER: r8 = 0 FAULT HANDLER: r9 = 0 FAULT HANDLER: r10 = 0x16997e000 FAULT HANDLER: r11 = 0x246 FAULT HANDLER: r12 = 0 FAULT HANDLER: r13 = 0x404a70 FAULT HANDLER: r14 = 0 FAULT HANDLER: r15 = 0 FAULT HANDLER: rflags = 0x10246 FAULT HANDLER: tls_base = 0 FAULT HANDLER: memory map: FAULT HANDLER: +-- 0x0000000001081fff -- FAULT HANDLER: | guard page FAULT HANDLER: +-- 0x0000000001081000 -- FAULT HANDLER: | stack FAULT HANDLER: +-- 0x000000000107d000 -- FAULT HANDLER: | guard page FAULT HANDLER: +-- 0x000000000107c000 -- FAULT HANDLER: | <undescribed> FAULT HANDLER: +-- 0x0000000001069fff -- FAULT HANDLER: | guard page FAULT HANDLER: +-- 0x0000000001069000 -- FAULT HANDLER: | IPC buffer FAULT HANDLER: +-- 0x0000000001068000 -- FAULT HANDLER: | guard page FAULT HANDLER: +-- 0x0000000001067000 -- FAULT HANDLER: | <undescribed> FAULT HANDLER: +-- 0x000000000105dfff -- FAULT HANDLER: | code and data FAULT HANDLER: +-- 0x0000000000400000 --
The config I am primarily interested in is named "cma34cr_centos_defconfig" but I seem to have similar problems for all the cma34cr defconfigs. I was successful at building working images when I switched to building on Ubuntu 16.04 LTS. This distribution version uses gcc 5.4. Thanks! Dan DaCosta