Hi Samuel,
The error you are seeing is occurring when the capDL-loader is attempting to mint an IOSpace capability from the IOSpace master capability. This capability will be used by the VMM to populate IOMMU mappings for a given PCI bus/dev/fun. Based on your previous mailing list post I'm guessing the IOMMU is still disabled for you. Being disabled the IOSpace master capability will not exist, and the mint will fail.
I'm not sure what to recommend as a way forward here. The VMM is currently written to assume the existence of an IOMMU. You could possibly work around this by stubbing out places where IOSpaces are initialized/used and you might be able to get something running in qemu, but otherwise I will reiterate my previous recommendation of using vmware for development.
Adrian
On Mon 27-Jun-2016 11:41 PM, Samuel Weiser wrote:
Hi again,
I'm playing around with camkes-vm in QEMU+KVM. I want to add a virtual PCI device to Linux, which is running as vm0 on top of seL4. However, I got stuck with some errors during system boot.
My setup is as follows: QEMU is configured to share a 1MB memory region between the host and the QEMU guest (seL4). Here's what QEMU sets up:
(qemu): info mtree
...
00000000fe000000-00000000fe0fffff (prio 1, RW): ivshmem-bar2-container
00000000fe000000-00000000fe0fffff (prio 0, RW): ivshmem.bar2
00000000febf1000-00000000febf10ff (prio 1, RW): ivshmem-mmio
...
(qemu): info pci
...
Bus 0, device 4, function 0:
RAM controller: PCI device 1af4:1110
IRQ 11.
BAR0: 32 bit memory at 0xfebf1000 [0xfebf10ff].
BAR2: 64 bit prefetchable memory at 0xfe000000 [0xfe0fffff].
id ""
...
I adapted a previously working configuration (optiplex9020.camkes) accordingly with what I thought should be correct. Especially, I added vm0_config.pci_devices_iospace and vm0_config.pci_devices as well as the PCI irq. Here's the configuration:
configuration {
VM_CONFIGURATION_DEF()
VM_PER_VM_CONFIG_DEF(0, 2)
vm0.simple_untyped24_pool = 12;
vm0.heap_size = 0;
vm0.guest_ram_mb = 1536;
vm0.kernel_cmdline = VM_GUEST_CMDLINE;
vm0.kernel_image = C162_KERNEL_IMAGE;
vm0.kernel_relocs = C162_KERNEL_IMAGE;
vm0.initrd_image = C162_ROOTFS;
vm0.iospace_domain = 0x00;
vm0_config.ram = [ [ 0x20800000, 23 ], [ 0x21000000, 24 ], [ 0x22000000, 25 ], [ 0x24000000, 26], [ 0x28000000, 27], [0x30000000, 28], [0x40000000, 29] , [0x60000000, 30], [0xa0000000, 28]];
vm0_config.ioports = [
{"start":0x2f8, "end":0x2ff, "pci_device":0, "name":"COM2 Serial Port"},
{"start":0x2e8, "end":0x2ef, "pci_device":0, "name":"COM4 Serial Port"}
];
vm0_config.irqs = [
{"name":"Serial", "source":3, "level_trig":0, "active_low":0, "dest":3},
{"name":"PCI", "source":11, "level_trig":1, "active_low":1, "dest":11}
];
vm0_config.pci_devices_iospace = 1;
vm0_config.pci_devices = [
{"name":"PCI",
"bus":0, "dev":0x04, "fun":0,
"irq":"PCI",
"memory":[
{"paddr":0xfe000000, "size":0x100000, "page_bits":12},
],
},
];
}
However, after creating the MMIO frames and doing some other stuff, the boot process fails, as shown below. The error also occurs if I change or completely remove just the "memory" definition of my PCI device. I also tried different values for "iospace_domain" (QEMU should use 0 as default PCI domain).
Thanks in advance for any hints and ideas!
Best,
Sammey
Starting Loader...
Parsing bootinfo...
1041793 free cap slots, from 6783 to 1048576
Untyped memory (24)
0x0000000000100000 - 0x0000000000108000
0x0000000000108000 - 0x0000000000109000
0x0000000003000000 - 0x0000000004000000
0x0000000004000000 - 0x0000000008000000
0x0000000008000000 - 0x0000000010000000
0x0000000010000000 - 0x0000000018000000
0x0000000018000000 - 0x000000001c000000
0x000000001c000000 - 0x000000001e000000
0x000000001e000000 - 0x000000001f000000
0x000000001f000000 - 0x000000001f800000
0x000000001f800000 - 0x000000001fc00000
0x0000000001b6b000 - 0x0000000001b6c000
0x0000000001b6c000 - 0x0000000001b70000
0x0000000001b70000 - 0x0000000001b80000
0x0000000001b80000 - 0x0000000001c00000
0x0000000001c00000 - 0x0000000001e00000
0x0000000001e00000 - 0x0000000001f00000
0x0000000001f00000 - 0x0000000001f80000
0x0000000001f80000 - 0x0000000001fc0000
0x0000000001fc0000 - 0x0000000001fe0000
0x0000000001fe0000 - 0x0000000001ff0000
0x0000000001ff0000 - 0x0000000001ff2000
0x0000000001ff2000 - 0x0000000001ff3000
0x0000000001ff3000 - 0x0000000001ff3800
Loader is running in domain 0
Device untyped memory (30)
0x0000000000001000 - 0x0000000000002000
0x0000000000002000 - 0x0000000000004000
0x0000000000004000 - 0x0000000000008000
0x0000000000008000 - 0x0000000000010000
0x0000000000010000 - 0x0000000000020000
0x0000000000020000 - 0x0000000000040000
0x0000000000040000 - 0x0000000000080000
0x0000000000080000 - 0x0000000000100000
0x000000001fc00000 - 0x0000000020000000
0x0000000020001000 - 0x0000000020002000
0x0000000020002000 - 0x0000000020004000
0x0000000020004000 - 0x0000000020008000
0x0000000020008000 - 0x0000000020010000
0x0000000020010000 - 0x0000000020020000
0x0000000020020000 - 0x0000000020040000
0x0000000020040000 - 0x0000000020080000
0x0000000020080000 - 0x0000000020100000
0x0000000020100000 - 0x0000000020200000
0x0000000020200000 - 0x0000000020400000
0x0000000020400000 - 0x0000000020800000
0x0000000020800000 - 0x0000000021000000
0x0000000021000000 - 0x0000000022000000
0x0000000022000000 - 0x0000000024000000
0x0000000024000000 - 0x0000000028000000
0x0000000028000000 - 0x0000000030000000
0x0000000030000000 - 0x0000000040000000
0x0000000040000000 - 0x0000000060000000
0x0000000060000000 - 0x00000000a0000000
0x00000000a0000000 - 0x00000000e0000000
0x00000000e0000000 - 0x0000000000000000
Sorting untypeds...
Untyped 0 (cptr=1a39) is of size 15. Placing in slot 17...
Untyped 1 (cptr=1a3a) is of size 12. Placing in slot 20...
Untyped 2 (cptr=1a3b) is of size 24. Placing in slot 5...
Untyped 3 (cptr=1a3c) is of size 26. Placing in slot 2...
Untyped 4 (cptr=1a3d) is of size 27. Placing in slot 0...
Untyped 5 (cptr=1a3e) is of size 27. Placing in slot 1...
Untyped 6 (cptr=1a3f) is of size 26. Placing in slot 3...
Untyped 7 (cptr=1a40) is of size 25. Placing in slot 4...
Untyped 8 (cptr=1a41) is of size 24. Placing in slot 6...
Untyped 9 (cptr=1a42) is of size 23. Placing in slot 7...
Untyped 10 (cptr=1a43) is of size 22. Placing in slot 8...
Untyped 11 (cptr=1a44) is of size 12. Placing in slot 21...
Untyped 12 (cptr=1a45) is of size 14. Placing in slot 18...
Untyped 13 (cptr=1a46) is of size 16. Placing in slot 15...
Untyped 14 (cptr=1a47) is of size 19. Placing in slot 11...
Untyped 15 (cptr=1a48) is of size 21. Placing in slot 9...
Untyped 16 (cptr=1a49) is of size 20. Placing in slot 10...
Untyped 17 (cptr=1a4a) is of size 19. Placing in slot 12...
Untyped 18 (cptr=1a4b) is of size 18. Placing in slot 13...
Untyped 19 (cptr=1a4c) is of size 17. Placing in slot 14...
Untyped 20 (cptr=1a4d) is of size 16. Placing in slot 16...
Untyped 21 (cptr=1a4e) is of size 13. Placing in slot 19...
Untyped 22 (cptr=1a4f) is of size 12. Placing in slot 22...
Untyped 23 (cptr=1a50) is of size 11. Placing in slot 23...
Creating objects...
...
Creating object conn1_mmio_frame_4261412864 in slot 6808, from untyped 1a3c...
device frame, paddr = 0xfe000000, size = 12 bits
Creating object conn1_mmio_frame_4261416960 in slot 6809, from untyped 1a3c...
device frame, paddr = 0xfe001000, size = 12 bits
Creating object conn1_mmio_frame_4261421056 in slot 6810, from untyped 1a3c...
device frame, paddr = 0xfe002000, size = 12 bits
...
Creating object vm_vm0_pre_init_ep in slot 10275, from untyped 1a3c...
Creating object conn1_iospace_32 in slot 10276, from untyped 1a3c... <=== This is ignored!
Creating object conn4_iport_760_767 in slot 10276, from untyped 1a3c...
...
Populating slot 21 with cap to conn1_iospace_32...
minting (with badge/guard 0x20)...
<