Thanks for your quick reply,
*destroy env* worked.
On Mon, Aug 10, 2015 at 9:19 PM, Alexander Kroh wrote: Hi Andrew, You may need to refresh your environment variables. To do this, you can try this command at the u-boot prompt:
destroyenv If that does not work, you can manually destroy the environment by using
the sf commands:
sf probe || sf probe 1
sf erase 0xc0000 0x2000 I'll update the instruction on the web to include this step - Alex ________________________________________
From: Devel [devel-bounces@sel4.systems] on behalf of Andrew Shruhan [
ashruhan@docboxinc.com]
Sent: Tuesday, 11 August 2015 03:50
To: devel@sel4.systems
Cc: Satish Sundar
Subject: [seL4] U-boot help sabrelite Hi, I am attempting to follow the tutorial booting from SPI for the sabrelite
https://sel4.systems/Hardware/sabreLite/ when booting I obtain this output and am not able to run "run bootsel4_mmc" U-Boot 2009.08-dirty (Jun 27 2013 - 16:26:46) CPU: Freescale i.MX6 family TO1.2 at 792 MHz
Temperature: 36 C, calibration data 0x56a4bc7d
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 264000000Hz
emi_slow clock: 132000000Hz
ddr clock : 528000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
nfc clock : 24000000Hz
Board: MX6Q-SABRELITE:[ POR]
Boot Device: I2C
I2C: ready
DRAM: 1 GB
MMC: FSL_USDHC: 0,FSL_USDHC: 1
JEDEC ID: 0xbf:0x25:0x41
Reading SPI NOR flash 0xc0000 [0x2000 bytes] -> ram 0x276009b8
SUCCESS In: serial
Out: serial
Err: serial
Net: got MAC address from IIM: 00:19:b8:01:fd:6d
FEC0
Hit any key to stop autoboot: 0
AHCI 0000.0000 1 slots 1 ports ? Gbps 0x0 impl SATA mode
flags:
No port device detected!
Unknown command 'load' - try 'help' SATA device 1: unknown device
Unknown command 'load' - try 'help'
Card did not respond to voltage select!
mmc0(part 0) is current device
Unknown command 'load' - try 'help'
mmc1 is current device
Unknown command 'load' - try 'help'
Unknown command 'usb' - try 'help'
Unknown command 'usb' - try 'help'
Unknown command 'load' - try 'help'
Unknown command 'usb' - try 'help'
Unknown command 'load' - try 'help' 6x_bootscript not found serial console at 115200, 8N1 details at http://boundarydevices.com/6q_bootscript
AHCI 0000.0000 1 slots 1 ports ? Gbps 0x0 impl SATA mode
flags:
No port device detected!
AHCI 0000.0000 1 slots 1 ports ? Gbps 0x0 impl SATA mode
flags:
No port device detected!
Card did not respond to voltage select!
mmc0(part 0) is current device
expose mmc drive 0 over USB
Unknown command 'ums' - try 'help'
Card did not respond to voltage select!
no block devices found
ERTOS MX6Q SABRELITE U-Boot >
--
-Andrew Andrew P. Shruhan
Research and Development Engineer III DocBox, Inc.
320 Nevada St
Newton MA, 02460
Work: 857-598-2819 ext. 117tel:857-598-2819%20ext.%20117
www.docboxinc.comhttp://www.docboxinc.com/ ________________________________ The information in this e-mail may be confidential and subject to legal
professional privilege and/or copyright. National ICT Australia Limited
accepts no liability for any damage caused by this email or its attachments. --
-Andrew
Andrew P. Shruhan
Research and Development Engineer III
DocBox, Inc.
320 Nevada St
Newton MA, 02460
Work: 857-598-2819 ext. 117
www.docboxinc.com