Hi all, I built a bin image from sel4test (https://github.com/seL4/sel4test).I am trying to load .bin image on RPI-3, but it's failing. I am following below steps... U-Boot> fatload mmc 0 0x00200000 kernel.binreading kernel.bin2108096 bytes read in 329 ms (6.1 MiB/s)U-Boot> go 0x00200000## Starting application at 0x00200000 ...  i got stuck here... Along with this i also tried with two another methods but facing same issue..METHOD-1 :-==========U-Boot> fatload mmc 0 0x00200000 kernel.binreading kernel.bin2108096 bytes read in 330 ms (6.1 MiB/s)U-Boot> loadb 0x00200000 115200## Ready for binary (kermit) download to 0x00200000 at 115200 bps..U-Boot> load mmc 0:1 0x00200000 kernel.bin2108096 bytes read in 330 ms (6.1 MiB/s)U-Boot> go 0x00200000## Starting application at 0x00200000 ...METHOD-2:- ===========U-Boot> load mmc 0:1 0x00200000 kernel.binreading kernel.bin2108096 bytes read in 330 ms (6.1 MiB/s)U-Boot> go 0x00200000## Starting application at 0x00200000 ... please guide me through this issue, i wanted to load kernel.bin(sel4test-driver-image-arm-bcm2837.bin) file on RPI-3.... RegardsAshok