Help me! I am running sel4test on my TX1 according to the official tutorial, but I get a problem again and again. For the newly purchased TX1, I directly connected my Ubuntu host with UART serial port. At the same time, I follow this instruction ( https://docs.sel4.systems/Hardware/jetsontx1.html ), pulled the latest sel4test project code, successfully ran ninja command and built images "sel4test-driver-image-arm-tx1". Everything seemed to be going very smoothly. I use the newly purchased SanDisk 64GB SD card to boot my image, which has been formatted in ext4 format. Then I use command `sudo screen / dev / ttyusb0 115200` to open the UART serial port. After pressing and holding the power key for 1 second, and TX1 starts. Then I hit the Enter key to make TX1 cancel the auto boot default image and enter the u-boot interactive command line. Then, according to the instruction, under uboot, I typed the following command to load the image and start from the address 0x82000000: ``` ext4load mmc 1 0x82000000 sel4test-driver-image-arm-tx1 go 0x82000000 ``` Finally, I failed to start sel4test as I wanted. After many repetitions, I got the same error. This is my output： ------------------------------------------------------------------------------------------------------------------------------------------ Tegra210 (P2371-2180) # ext4load mmc 1 0x82000000 sel4test-driver-image-arm-tx1 5247256 bytes read in 260 ms (19.2 MiB/s) Tegra210 (P2371-2180) # go 0x82000000 ## Starting application at 0x82000000 ... ELF-loader started on CPU: ARM Ltd. Cortex-A57 r1p1 paddr=[80a57000..80f58117] No DTB passed in from boot loader. Looking for DTB in CPIO archive...found at 80b825e0. Loaded DTB from 80b825e0. paddr=[8023d000..8024afff] ELF-loading image 'kernel' to 80000000 paddr=[80000000..8023cfff] vaddr=[ffffff8080000000..ffffff808023cfff] virt_entry=ffffff8080000000 ELF-loading image 'sel4test-driver' to 8024b000 paddr=[8024b000..80661fff] vaddr=[400000..816fff] virt_entry=40f0b8 Enabling MMU and paging Jumping to kernel-image entry point... Warning: gpt_cntfrq 19200000, expected 12000000 Bootstrapping kernel available phys memory regions: 2 [80000000..ff000000] [100000000..180000000] reserved virt address space regions: 3 [ffffff8080000000..ffffff808023d000] [ffffff808023d000..ffffff808024b000] [ffffff808024b000..ffffff8080662000] seL4 failed assertion 'cap_get_capType(destSlot->cap) == cap_null_cap' at /home/yjy/Desktop/sel4-rpi/sel4test_newv2/kernel/src/object/cnode.c:426 in function cteInsert halting... Kernel entry via Interrupt, irq 0 ------------------------------------------------------------------------------------------------------------------------------------------ Help me! I am running sel4test on my TX1 according to the official tutorial, but I get a problem again and again. For the newly purchased TX1, I directly connected my Ubuntu host with UART serial port. At the same time, I follow this instruction ( https://docs.sel4.systems/Hardware/jetsontx1.html ), pulled the latest sel4test project code, successfully ran ninja command and built images "sel4test-driver-image-arm-tx1". Everything seemed to be going very smoothly. I use the newly purchased SanDisk 64GB SD card to boot my image, which has been formatted in ext4 format. Then I use command `sudo screen / dev / ttyusb0 115200` to open the UART serial port. After pressing and holding the power key for 1 second, and TX1 starts. Then I hit the Enter key to make TX1 cancel the auto boot default image and enter the u-boot interactive command line. Then, according to the instruction, under uboot, I typed the following command to load the image and start from the address 0x82000000: ``` ext4load mmc 1 0x82000000 sel4test-driver-image-arm-tx1 go 0x82000000 ``` Finally, I failed to start sel4test as I wanted. After many repetitions, I got the same error. This is my output： ------------------------------------------------------------------------------------------------------------------------------------------ Tegra210 (P2371-2180) # ext4load mmc 1 0x82000000 sel4test-driver-image-arm-tx1 5247256 bytes read in 260 ms (19.2 MiB/s) Tegra210 (P2371-2180) # go 0x82000000 ## Starting application at 0x82000000 ... ELF-loader started on CPU: ARM Ltd. Cortex-A57 r1p1 paddr=[80a57000..80f58117] No DTB passed in from boot loader. Looking for DTB in CPIO archive...found at 80b825e0. Loaded DTB from 80b825e0. paddr=[8023d000..8024afff] ELF-loading image 'kernel' to 80000000 paddr=[80000000..8023cfff] vaddr=[ffffff8080000000..ffffff808023cfff] virt_entry=ffffff8080000000 ELF-loading image 'sel4test-driver' to 8024b000 paddr=[8024b000..80661fff] vaddr=[400000..816fff] virt_entry=40f0b8 Enabling MMU and paging Jumping to kernel-image entry point... Warning: gpt_cntfrq 19200000, expected 12000000 Bootstrapping kernel available phys memory regions: 2 [80000000..ff000000] [100000000..180000000] reserved virt address space regions: 3 [ffffff8080000000..ffffff808023d000] [ffffff808023d000..ffffff808024b000] [ffffff808024b000..ffffff8080662000] seL4 failed assertion 'cap_get_capType(destSlot->cap) == cap_null_cap' at /home/yjy/Desktop/sel4-rpi/sel4test_newv2/kernel/src/object/cnode.c:426 in function cteInsert halting... Kernel entry via Interrupt, irq 0 ------------------------------------------------------------------------------------------------------------------------------------------ I'm about to collapse. I really need your help. How can I solve this problem? 1. Why did I get this warning？ "Warning: gpt_cntfrq 19200000, expected 12000000" , It exists in this file "/sel4test/kernel/src/drivers/timer/generic_timer.c:21" 2. About reporting errors "failed assertion 'cap_get_capType(destSlot->cap) == cap_null_cap'". I found that the variable "(slot_ptr_t) (rootserver.tcb) ) -> cap.words[0] " is equals to 0xffffffffffffffff, so that the cap_get_capType(destSlot->cap) <=> (slot_ptr_t) (rootserver.tcb) ) -> cap.words[0] & 0x1full != 0 . I guess it caused the mistake, but i don't know why. I'm about to collapse. I really need your help. How can I solve this problem?