Hi Jeremy, This is currently not on our roadmap and hasn't been fixed. However, if you can put up a pull request with what you have done we'd be more than happy to take a look. Cheers, Anna. ________________________________ From: Devel <devel-bounces(a)sel4.systems> on behalf of Jeremy Fields <fieldsjd(a)critical.com> Sent: Wednesday, 18 July 2018 11:24 PM To: devel(a)sel4.systems Subject: [seL4] Image lies outside of usable physical memory v2 http://sel4.systems/pipermail/devel/2016-July/000918.html I'm running into the same issue, with likely the same cause. I wanted to see if there is any further insight that can be given on this? I'm guessing there hasn't been any updates to seL4's memory allocation in this aspect. (I'm using seL4 9.0.1) My naive attempt of commenting out that particular check in seL4 just results in the machine hard resetting when it runs (if only it were that easy). Any chance this is on a roadmap? -- Sincerely, Jeremy ______________________________ Software Engineer Critical Technologies Inc.