Corey Lewis ( https://sel4.atlassian.net/secure/ViewProfile.jspa?accountId=5f3c7e833236070... ) *created* an issue

RFCs ( https://sel4.atlassian.net/browse/RFC?atlOrigin=eyJpIjoiYTdkYmE0NmQxOTNlNGY5... ) / RFC ( https://sel4.atlassian.net/browse/RFC-11?atlOrigin=eyJpIjoiYTdkYmE0NmQxOTNlN... ) RFC-11 ( https://sel4.atlassian.net/browse/RFC-11?atlOrigin=eyJpIjoiYTdkYmE0NmQxOTNlN... ) MCS: set fault and timeout handler parameters while configuring TCBs ( https://sel4.atlassian.net/browse/RFC-11?atlOrigin=eyJpIjoiYTdkYmE0NmQxOTNlN... )

Issue Type: RFC Assignee: Corey Lewis ( https://sel4.atlassian.net/secure/ViewProfile.jspa?accountId=5f3c7e833236070... ) Created: 22/Jul/22 12:34 PM Reporter: Corey Lewis ( https://sel4.atlassian.net/secure/ViewProfile.jspa?accountId=5f3c7e833236070... )

******* Summary *******

This RFC proposes to modify TCB configuration functions so that it is possible to directly set the badge and rights of the fault and timeout handler Endpoint Caps. This would make it consistent with how the CSpace and VSpace of threads are set.

********** Motivation **********

This change is motivated by wanting to simplify the process of configuring fault and timeout handlers when using a system with the MCS extensions enabled. Without this change, setting the badge or rights of a fault handler requires first minting a new copy of the Endpoint Cap with the desired parameters, and then installing it in the TCB. In many systems this additional copy of the cap ends up being unnecessary.

A longer term motivation is that we would like to port how fault handlers are configured on MCS to mainline seL4. This would resolve https://sel4.atlassian.net/browse/SELFOUR-29 , improve consistency, and provide increased functionality to systems that do not use MCS. However, this next step would be very difficult without this change, due to technicalities in the existing verification approach of the CapDL Loader.

*********************** Guide-level explanation ***********************

On systems with the MCS extensions enabled, caps to a TCB's fault and timeout handler endpoints are installed directly in the TCB. This change adds two new parameters to the relevant API calls used to install these caps (TCBSetSchedParams, TCBSetTimeoutEndpoint, TCBSetSpace). These parameters can be used to set the badge and rights of the fault and timeout handler endpoints being installed. In cases where the badge and rights do not need to be set, the existing approach is still supported by setting both parameters to 0.

See https://github.com/seL4/capdl/pull/47 for an example of this new functionality being used. The CapDL Loader previously minted a new endpoint cap for the fault handler with the required badge and rights. With this change it no longer needs to mint the extra cap and instead seL4 sets the fields while installing the endpoint caps in the TCB.

https://github.com/seL4/sel4test/pull/78 is an example of updating existing code without using the new functionality. As the seL4 tests generally do not need to set the badge and rights, they are able to be updated for this change by just using seL4_NilData and seL4_NoRights as the parameters.

*************************** Reference-level explanation ***************************

The API calls TCBSetSchedParams, TCBSetTimeoutEndpoint and TCBSetSpace have each had two new parameters added, and their corresponding decode functions expect two additional syscall arguments. These arguments are used in the same pattern as used when setting the CSpace and VSpace of a TCB. When the parameters are non-zero then the provided cap is modified with updateCapData and maskCapRights, and then it is confirmed that it is safe to copy the capability by calling deriveCap. Following this, the decode functions then confirm that the modified cap is a valid cap through validFaultHandler. https://github.com/seL4/seL4/pull/889 is the current proposal for what these changes would look like.

In addition to the patch to the kernel, there are also patches for seL4_libs, sel4test, and capdl which show the required changes to migrate these projects to the new API. The patch to sel4test is an example of a minimal migration which does not use the new functionality, while the patch for capdl is a migration that does make use of it.

********* Drawbacks *********

On some platforms, the extra parameters that this change adds might exceed the hardware limit on the number of message registers, which would cause the syscall to go into the IPC buffer. In the worst case, if this does become an issue then it could possibly be avoided by modifying the API so that each syscall performs fewer operations and hence does not require as many arguments.

This implementation also means that seL4 will silently downgrade some incorrect capabilities to NullCaps if a user attempts to set them as a TCBs fault or timeout handler, instead of returning an error. This behaviour currently occurs when setting the CSpace and VSpace and is generally safe, although could cause confusion if it hides a user error. If this behaviour is not desired then we could separately check for this happening and explicitly return the error.

************************** Rationale and alternatives **************************

This design provides increased consistency within seL4, as it makes setting the fault and timeout handlers of TCBs exactly the same as setting their CSpace and VSpace.

An alternative design with a minor difference that was considered was combining the badge and right parameters into one word, in the same fashion as the seL4_CNode_CapData structure. While this would lead to a slightly simpler API due to only needing one parameter, on 64-bit platforms it would limit the badge to 60 bits instead of the full 64. Since existing users often make use of all available bits for the badges, this alternative was not chosen.

******************** Unresolved questions ********************

There are existing pull-requests that demonstrate the proposed changes.

https://github.com/seL4/seL4/pull/889 https://github.com/seL4/seL4_libs/pull/65 https://github.com/seL4/sel4test/pull/78 https://github.com/seL4/capdl/pull/47

There is also some initial work on updating the seL4 proofs for this proposal. https://github.com/seL4/l4v/pull/505 While initial verification efforts suggest that no further implementation changes are required to maintain verifiability, this work is not yet completed and progress might lead to issues being discovered.

( https://sel4.atlassian.net/browse/RFC-11#add-comment?atlOrigin=eyJpIjoiYTdkY... ) Add Comment ( https://sel4.atlassian.net/browse/RFC-11#add-comment?atlOrigin=eyJpIjoiYTdkY... )

Get Jira notifications on your phone! Download the Jira Cloud app for Android ( https://play.google.com/store/apps/details?id=com.atlassian.android.jira.cor... ) or iOS ( https://itunes.apple.com/app/apple-store/id1006972087?pt=696495&ct=Email... ) This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100202- sha1:0ba1f75 )