Hi all,
I have created a simple CAMKES-VM-x86 app for a PC but its PCI devices are not working due to not receiving corresponding interrupts. By adding a printf to the function "handleInterrupt" inside the seL4 kernel I found that only some limited interrupts such as timer and serial are received. However, capdl_spec.c file contains all necessary declaration of capabilities and objects for the required interrupts such as follows,
... [19625] = { #ifdef CONFIG_DEBUG_BUILD .name = "vm0_irq_10", #endif .type = CDL_IOAPICInterrupt, .slots.num = 1, .slots.slot = (CDL_CapSlot[]) { {0, {.type = CDL_NotificationCap, .obj_id = 19567 /* vm0_irq_notification_obj_10 */, .is_orig = true, .rights = (CDL_CanRead), .data = { .tag = CDL_CapData_Badge, .badge = 0}}}, }, .ioapicirq_extra = { .ioapic = 0, .ioapic_pin = 10, .level = 1, .polarity = 1, }, }, ...
and the host endpoint of the VMM thread is properly set to receive IRQ notifications and route them to VM, and the IOAPIC pin number (source) is also true, I checked.
How can I solve the problem? Any pointers would be appreciated.
Kind regards, Hamed