12 Nov
2019
12 Nov
'19
3:13 a.m.
I do believe you can use SiFive's toolchain:
https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.…
Then you don't have to compile it.
There is also Data61's Docker
https://github.com/SEL4PROJ/seL4-CAmkES-L4v-dockerfiles
If you look at the make file there are some targets for including the RISC-V toolchain.
Jesse
On 2019-11-11 1:58 a.m., Zhuang, Siwei (Data61, Kensington NSW) wrote:
Hi Jacob,
You need to enable multilib when building "riscv-gnu-toolchain".
./configure --prefix=/path-to-install-toolchain --enable-multilib
then
make or make linux
Running seL4 no longer requires RISC-V tools. In case you want to use Spike,
I'd suggest building the riscv-isa-sim separately to get the latest code.
Regards,
Siwei
On Sun, 2019-11-10 at 15:50 -0800, Jacob Yu wrote:
Hi
I am trying to build "seL4 tests" for "Spike" platform (the RISC-V
simulator from UC Berkeley) on Ubuntu 18.04.3 LTS, a 64-bit system.
First of all, I was able to build RISC-V tools with "build.sh" after
manually installing "riscv-gnu-toolchain" from GitHub as well as additional
python modules (future, ply, protobuf). I then kicked of "../init-build.sh
-DPLATFORM=spike -DRISCV64=TRUE -DSIMULATION=1" from local build directory.
After that, however, "ninja" command complained about "undefined
reference
to `__nedf2'". I understand there is no FPU support in "Spike"
platform so
a need for "soft-float" module. Where should I specify "-lsoft-fp"?
Any suggestions?
Thanks,
Jacob
_______________________________________________
Devel mailing list
Devel(a)sel4.systems
https://sel4.systems/lists/listinfo/devel
_______________________________________________
Devel mailing list
Devel(a)sel4.systems
https://sel4.systems/lists/listinfo/devel