On Wed, Jun 30, 2021 at 11:53 AM Michael Neises <neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error regarding kvm I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine q35,accel=kvm,kernel-irqchip=split -cpu Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx -nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)." A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled. It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. (https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
Peter and Kent, I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x: https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323... When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'. All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0" (or even just ./simulate with the -enable-kvm option added) I still get this error: Could not access KVM kernel module: No such file or directory qemu-system-x86_64: failed to initialize KVM: No such file or directory By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain. If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows. Cheers, Michael Neises On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises <neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error regarding kvm
I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine
q35,accel=kvm,kernel-irqchip=split -cpu Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx -nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. (https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
On Wed, Jun 30, 2021 at 1:19 PM Michael Neises <neisesmichael@gmail.com> wrote:
Peter and Kent,
I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x: https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323... When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'.
All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0"
(or even just ./simulate with the -enable-kvm option added)
I still get this error:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain.
Docker probably doesn't make the KVM host resources available inside the container by default. This post looks like it may be what you need to do: https://stackoverflow.com/questions/48422001/how-to-launch-qemu-kvm-from-ins... You can still build inside the docker, but running qemu outside of the container should only require installing the qemu dependencies and not all of the build dependencies.
If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows.
Cheers,
Michael Neises
On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises <neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error regarding kvm I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine q35,accel=kvm,kernel-irqchip=split -cpu Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx -nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. (https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
"Michael" == Michael Neises <neisesmichael@gmail.com> writes:
Michael> All said, when I enter the Docker container and do: sudo Michael> ./simulate --machine q35,accel=kvm,kernel-irqchip=split Michael> --mem-size 2G --extra-cpu-opts "+vmx" Michael> --extra-qemu-args="-enable-kvm -device Michael> intel-iommu,intremap=off -net nic,model=e1000 -net Michael> tap,script=no,ifname=tap0" Maybe run just the simulate part on the host ? You can use the docker image to build, and test it outside the image. Peter C -- Dr Peter Chubb https://trustworthy.systems/ Trustworthy Systems Group CSE, UNSW
Hi all, Michael, I ran into very similar problems as you (almost same order: VT-x, support, nested emulation,etc... ) that's why, desperated, I ended up working via qemu/arm option but my original intention (and still I'm interested) was to work with qemu/PC99. The option you are looking for (running qemu inside docker container) looks interesting to me from developers point of view (portable dev environment). I would appreciate if you share any details of your progress here as maybe would be interesting to write up a specific intructions for this so in the future others can benefit. Cheers, El mié., 30 jun. 2021 5:23, Michael Neises <neisesmichael@gmail.com> escribió:
Peter and Kent,
I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x:
https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323... When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'.
All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0"
(or even just ./simulate with the -enable-kvm option added)
I still get this error:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain.
If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows.
Cheers,
Michael Neises
On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises <neisesmichael@gmail.com
wrote:
Kent,
I tried using those extra arguments and got the same error regarding
kvm I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine
q35,accel=kvm,kernel-irqchip=split -cpu
Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx
-nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. (https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4 ) has an example grub config.
_______________________________________________ Devel mailing list -- devel@sel4.systems To unsubscribe send an email to devel-leave@sel4.systems
All, I tried to run ./simulate outside of the Docker instance as recommended. While that seems to solve the KVM issue, another error has taken its place. "host doesn't support requested feature: CPUID.80000001H:EDX.pdpe1g" If I remove the flag, the simulation will begin, but it soon dies because "Huge page not supported by the processor." None of my machines (even my newest CPU which was launched in 2019) support huge pages. Am I out of luck? Cheers, Michael Neises On Tue, Jun 29, 2021 at 11:36 PM Hugo V.C. <skydivebcn@gmail.com> wrote:
Hi all,
Michael, I ran into very similar problems as you (almost same order: VT-x, support, nested emulation,etc... ) that's why, desperated, I ended up working via qemu/arm option but my original intention (and still I'm interested) was to work with qemu/PC99. The option you are looking for (running qemu inside docker container) looks interesting to me from developers point of view (portable dev environment). I would appreciate if you share any details of your progress here as maybe would be interesting to write up a specific intructions for this so in the future others can benefit.
Cheers,
El mié., 30 jun. 2021 5:23, Michael Neises <neisesmichael@gmail.com> escribió:
Peter and Kent,
I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x:
https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323... When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'.
All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0"
(or even just ./simulate with the -enable-kvm option added)
I still get this error:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain.
If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows.
Cheers,
Michael Neises
On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises < neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error regarding
kvm I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine
q35,accel=kvm,kernel-irqchip=split -cpu
Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx
-nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or
directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. ( https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
_______________________________________________ Devel mailing list -- devel@sel4.systems To unsubscribe send an email to devel-leave@sel4.systems
You can turn kernel huge page support off with the config option: KernelHugePage. `cmake -DKernelHugePage=OFF .` in the build directory and then rebuilding should turn it off. On Mon, Jul 5, 2021 at 10:00 AM Michael Neises <neisesmichael@gmail.com> wrote:
All,
I tried to run ./simulate outside of the Docker instance as recommended. While that seems to solve the KVM issue, another error has taken its place.
"host doesn't support requested feature: CPUID.80000001H:EDX.pdpe1g"
If I remove the flag, the simulation will begin, but it soon dies because "Huge page not supported by the processor." None of my machines (even my newest CPU which was launched in 2019) support huge pages. Am I out of luck?
Cheers, Michael Neises
On Tue, Jun 29, 2021 at 11:36 PM Hugo V.C. <skydivebcn@gmail.com> wrote:
Hi all,
Michael, I ran into very similar problems as you (almost same order: VT-x, support, nested emulation,etc... ) that's why, desperated, I ended up working via qemu/arm option but my original intention (and still I'm interested) was to work with qemu/PC99. The option you are looking for (running qemu inside docker container) looks interesting to me from developers point of view (portable dev environment). I would appreciate if you share any details of your progress here as maybe would be interesting to write up a specific intructions for this so in the future others can benefit.
Cheers,
El mié., 30 jun. 2021 5:23, Michael Neises <neisesmichael@gmail.com> escribió:
Peter and Kent,
I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x: https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323... When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'.
All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0"
(or even just ./simulate with the -enable-kvm option added)
I still get this error:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain.
If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows.
Cheers,
Michael Neises
On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises <neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error regarding kvm
I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine
q35,accel=kvm,kernel-irqchip=split -cpu Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx -nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. (https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
_______________________________________________ Devel mailing list -- devel@sel4.systems To unsubscribe send an email to devel-leave@sel4.systems
All, After turning HugePage off, I can successfully build the tutorial solution and boot into the virtual machine from outside the Docker instance. However, just before being prompted to log in, the following errors appear: Failed to locate device consumes_event Failed to locate device emits_event and when I try to `grep poke /proc/devices` as directed in the tutorial, there is no output, so I don't think the kernel module is working. I recognize the "consume" and "emit" keywords, but I'm confused because there are no such references in the .camkes file. I mainly want to ensure I have a functioning kernel module to work with, so I would appreciate any guidance you can provide. I've tried to collect all my steps so far here: https://github.com/NeisesResearch/vm_measure/wiki/Building-the-camkes_vm_lin... Cheers, Michael On Sun, Jul 4, 2021 at 7:54 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
You can turn kernel huge page support off with the config option: KernelHugePage. `cmake -DKernelHugePage=OFF .` in the build directory and then rebuilding should turn it off.
On Mon, Jul 5, 2021 at 10:00 AM Michael Neises <neisesmichael@gmail.com> wrote:
All,
I tried to run ./simulate outside of the Docker instance as recommended.
While that seems to solve the KVM issue, another error has taken its place.
"host doesn't support requested feature: CPUID.80000001H:EDX.pdpe1g"
If I remove the flag, the simulation will begin, but it soon dies
because "Huge page not supported by the processor." None of my machines (even my newest CPU which was launched in 2019) support huge pages. Am I out of luck?
Cheers, Michael Neises
On Tue, Jun 29, 2021 at 11:36 PM Hugo V.C. <skydivebcn@gmail.com> wrote:
Hi all,
Michael, I ran into very similar problems as you (almost same order:
VT-x, support, nested emulation,etc... ) that's why, desperated, I ended up working via qemu/arm option but my original intention (and still I'm interested) was to work with qemu/PC99. The option you are looking for (running qemu inside docker container) looks interesting to me from developers point of view (portable dev environment). I would appreciate if you share any details of your progress here as maybe would be interesting to write up a specific intructions for this so in the future others can benefit.
Cheers,
El mié., 30 jun. 2021 5:23, Michael Neises <neisesmichael@gmail.com>
escribió:
Peter and Kent,
I did `sudo apt-get install qemu-kvm` and I got an update. I can reboot and do `groups` to verify I'm in the correct group. By this webpage I have that my CPU supports vt-x:
https://ark.intel.com/content/www/us/en/ark/products/72164/intel-core-i5-323...
When I run `cat /sys/module/kvm_intel/parameters/nested` it outputs 'Y'.
All said, when I enter the Docker container and do: sudo ./simulate --machine q35,accel=kvm,kernel-irqchip=split --mem-size 2G --extra-cpu-opts "+vmx" --extra-qemu-args="-enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0"
(or even just ./simulate with the -enable-kvm option added)
I still get this error:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
By all rights it seems like I have KVM and it's loaded and I have the right permissions. However, if I do `groups` from within the Docker instance, I am not part of the kvm group, and in fact there is apparently no visible kvm group by way of `cat /etc/group | grep kvm`- nor is there a /dev/kvm to speak of. If it's a problem with using Docker, I can try to install the dependencies natively, but I've been there before and it's difficult to maintain.
If need be, I can also go back to booting the image on its own machine, but I have really enjoyed the turnover times that simulation allows.
Cheers,
Michael Neises
On Tue, Jun 29, 2021 at 9:18 PM Kent Mcleod <kent.mcleod72@gmail.com> wrote:
On Wed, Jun 30, 2021 at 11:53 AM Michael Neises < neisesmichael@gmail.com> wrote:
Kent,
I tried using those extra arguments and got the same error
regarding kvm I reported a few minutes ago:
./simulate: qemu-system-x86_64 -machine
q35,accel=kvm,kernel-irqchip=split -cpu
Nehalem,+vme,+pdpe1gb,-xsave,-xsaveopt,-xsavec,-fsgsbase,-invpcid,+syscall,+lm,enforce,+vmx
-nographic -serial mon:stdio -m size=2G -enable-kvm -device intel-iommu,intremap=off -net nic,model=e1000 -net tap,script=no,ifname=tap0 -kernel images/kernel-x86_64-pc99 -initrd images/capdl-loader-image-x86_64-pc99 Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or
directory
There are instructions on how to setup KVM and nested virtualization on the tutorial that I've pasted here: "Note if you are using QEMU it is important to ensure that your host machine has VT-x support and KVM (https://www.linux-kvm.org/page/Main_Page) installed. You also need to ensure you have enabled nested virtulisation with KVM guests as described here (https://www.linux-kvm.org/page/Nested_Guests)."
A quick way to check if nested virtualization is enabled (and therefore supported) on your host is to run `cat /sys/module/kvm_intel/parameters/nested`. `Y` should be returned if it's enabled.
It may be easier to run the image on an actual machine instead of in qemu. The images produced can be loaded by a multiboot loader such as grub or pxelinux. ( https://docs.sel4.systems/Hardware/VMware/#add-grub2-option-to-run-sel4) has an example grub config.
_______________________________________________ Devel mailing list -- devel@sel4.systems To unsubscribe send an email to devel-leave@sel4.systems
participants (4)
-
Hugo V.C. -
Kent Mcleod -
Michael Neises -
Peter Chubb