- Devel - lists.sel4.systems

intel-vtd.c::vtd_get_n_paging looks so suspicious
by laokz 14 Mar '20

14 Mar '20

Hello all, kernel/src/plat/pc99/machine/intel-vtd.c::vtd_get_n_paging() confused me a lot. Wish to get any help. This func intends to calculate paging pages needed for all RMRRs. The following code 'filter the identical regions by pci bus id', and use them to figure out the final result. ``` for (word_t i = 1; i < rmrr_list->num; i++) { if (vtd_get_root_index(rmrr_list->entries[i].device) != vtd_get_root_index(filtered.entries[filtered.num - 1].device) && rmrr_list->entries[i].base != filtered.entries[filtered.num - 1].base && rmrr_list->entries[i].limit != filtered.entries[filtered.num - 1].limit) { filtered.entries[filtered.num] = rmrr_list->entries[i]; filtered.num++; } } ``` But vtd_map_reserved_page() says, every different devices(with diff bus-dev- func ID) have their own paging structures. Then why do filter here like this , yet the logic looks so confusing. And on line 313, it counts pages according to the specified level address bits. ``` size += get_n_paging(region, 32 - (VTD_PT_INDEX_BITS * i + seL4_PageBits)); ``` So what does 32 mean? Maybe a typo? Thanks, laokz

2 2

Using sel4.xml/sel4arch.xml to generate custom bindings
by Alexandre Mutel 12 Mar '20

12 Mar '20

Hello, I would like to use the sel4.xml API description files to generate custom bindings for a prototype language to interact directly with seL4 without going through libsel4 C API. I assume that the structure of these files could change, which I'm willing to accept, but wanted to know if these files are here to stay in the future? I understand also that I will still have to parse libsel4 C headers to recover the full API which I'm fine with too. Do you see any trouble following this approach or would you recommend something else?

2 1

May be an error in "alloc_free_io_port_range" of projects/seL4_projects_libs/libsel4vmmplatsupport/src/ioports.c
by yadong.li 12 Mar '20

12 Mar '20

Hi: background: I run virtio_net and virt_con in the lastest version, it is run OK, but I try to add another virito blk, I meet run error below: "Unhandled offset of 0x400 of size 4, reading Assertion failed: !"panic" (/home/yadong.li/seL4_vm_11/sel4_horizon/camkes-arm-vm/projects/seL4_projects_libs/libsel4vmmplatsupport/src/drivers/virtio_emul.c: emul_io_in: 71)" I add print on my enviornmen, found: ********************start[0x1000], end[0x1400] /*net*/ ********************start[0x1400], end[0x1800] /*con*/ ********************start[0x1800], end[0x1c00] /*blk*/ ---------------------------virtio_con_io_in, con = 0x55f3238, offset = 0x400[0x1800:0x1400] port_no:1800 should belong "blk", but it recongnize as belong "con"(con may be not use the offset 0 feature), the boundary may be have some problem the function: static int alloc_free_io_port_range(vmm_io_port_list_t *io_list, ioport_range_t *io_range) { uint16_t free_port_addr = io_list->alloc_addr; if (free_port_addr + io_range->size < free_port_addr) { /* Possible overflow */ return -1; } io_list->alloc_addr += io_range->size; io_range->start = free_port_addr; io_range->end = free_port_addr + io_range->size; return 0; } I think "io_range->end = free_port_addr + io_range->size;" should change to "io_range->end = free_port_addr + io_range->size - 1;" ? Thank you very much!

2 1

Booting on a Jetson TK1 board.
by Travis Wheatley 11 Mar '20

11 Mar '20

Hello all, I am spinning up on sel4 and having difficulty booting a kernel on a Jetson TK1 board. I have successfully downloaded the cmakes repo and can build the x86 version of the code and run it as a simulation. I can also successfully build the TK1 version by changing the -DARCHETECTURE argument passed to init-build.sh to “tk1”. This results in a single image file named “capdl-loader-image-arm-tk1” to show up in my images folder (as opposed to both a kernel image and “userland” image that get created in the x86 version). So… I put that image on an SD card, plug it into the TK1, boot to a uboot prompt, and load the image using the command “fatload mmc 1 0x82000000 <filename>”. I can use “md” to see that the image is actually loaded properly. However, when I type “go 0x82000000” I see no output what so ever going out of the serial port. What I expect to see is similar output to what was displayed in the x86 simulation. I posted the question to the IRC channel yesterday and someone suggested using bootm or bootelf. No luck with either of these. So… hoping someone here might be able to give me a clue. — Travis

2 4

L4 Risc-v touchscreen board
by Luca Tapponi 27 Feb '20

27 Feb '20

I am newby in this sector and involved in a project to create a prototype (hardware and software) based on risc-v cpu and running L4-based microkernel. I need to control and program an attached touchscreen where I can create a simple graphic user interface too. I would appreciate any suggestion that bring me on the right road. Board should embed wi-fi network too. First step is to find the right hardware and second is to have development tools/environment to program the board. As much as possible open licensing should be adopted because the project falls in IT security solution and want to avoid any hidden backdoors. Thank you in advance. Best regards, Luca

1 0

devices.camkes: vm#.untyped_mmios: What does the integer after the addresses in this array represent?
by Turner, Ben 26 Feb '20

26 Feb '20

Hi all, As stated in the question, I'm not certain about how the integer part of the elements in the untyped_mmios array in devices.camkes are derived? E.g. in the TX2 devices.camkes file: vm0.untyped_mmios = [ "0x3886000:12", // GICV Iface. /* The purpose of these untyped regions is to force the untyped * allocator to treat this memory region as reserved so that when we * try to ensure that the VMM is placed into this region in RAM, it * will definitely be available for placement. * * This address pertains to guest-vm@f1000000 in the overlay DTS */ "0xF1000000:24", "0xF2000000:25", "0xF4000000:26", "0xF8000000:24", ]; I recognise that the range of addresses here covers the VM_RAM_SIZE specified, and so the pattern that emerges is: 24 --> 0x01000000 25 --> 0x02000000 26 --> 0x04000000 And so the above would cover the range 0xf1000000 --> 0xf9000000, which is the range of memory specified for the VM. Is this simply a case of the integer representing double the value with each increment. E.g: Integer Int Rep Hex 0 1 0x0000_0001 1 2 0x0000_0002 2 4 0x0000_0004 3 8 0x0000_0008 4 16 0x0000_0010 5 32 0x0000_0020 6 64 0x0000_0040 7 128 0x0000_0080 8 256 0x0000_0100 9 512 0x0000_0200 10 1024 0x0000_0400 11 2048 0x0000_0800 12 4096 0x0000_1000 13 8192 0x0000_2000 14 16384 0x0000_4000 15 32768 0x0000_8000 16 65536 0x0001_0000 17 131072 0x0002_0000 18 262144 0x0004_0000 19 524288 0x0008_0000 20 1E+06 0x0010_0000 21 2E+06 0x0020_0000 22 4E+06 0x0040_0000 23 8E+06 0x0080_0000 24 2E+07 0x0100_0000 25 3E+07 0x0200_0000 26 7E+07 0x0400_0000 27 1E+08 0x0800_0000 28 3E+08 0x1000_0000 29 5E+08 0x2000_0000 30 1E+09 0x4000_0000 31 2E+09 0x8000_0000 Thanks, Ben Turner Senior Engineer Roke Manor Research Ltd Tel: +44 (0)1794 833721 ben.turner(a)roke.co.uk<mailto:ben.turner@roke.co.uk> ________________________________________ Roke Manor Research Limited, Romsey, Hampshire, SO51 0ZN, United Kingdom.Part of the Chemring Group. Registered in England & Wales. Registered No: 00267550 http://www.roke.co.uk _______________________________________ The information contained in this e-mail and any attachments is proprietary to Roke Manor Research Limited and must not be passed to any third party without permission. This communication is for information only and shall not create or change any contractual relationship. ________________________________________

3 2

two questions when I add virtio net with virtio_console meanwhile in arm-vm project
by yadong.li 24 Feb '20

24 Feb '20

hi, I had make virtio_console work OK on my environment（armv8）, But I meet two question when I add virtio net with virtio_console meanwhile. Question1: "add_io_port_range@io.c:111 Requested ioport range 0x6200-0x6600" for VIRTIO CON overlaps with existing range 0x6200-0x6600 for VIRTIO PCI NET According to the print above: common_make_virtio_con(virtio_emul_vm, vm->pci, vm->io_port, VIRTIO_IOPORT_START, VIRTIO_IOPORT_SIZE, VIRTIO_INTERRUPT_PIN, VIRTIO_CON_PLAT_INTERRUPT_LINE, backend); common_make_virtio_net(virtio_emul_vm, vm->pci, vm->io_port, VIRTIO_IOPORT_START + 0x1000, VIRTIO_IOPORT_SIZE, VIRTIO_INTERRUPT_PIN, VIRTIO_NET_PLAT_INTERRUPT_LINE, backend); a、above two function，I found they use the same VIRTIO_IOPORT_START， I modify VIRTIO_IOPORT_START of common_make_virtio_net to （VIRTIO_IOPORT_START + 0x1000）, is it OK? b、I also found（VIRTIO_CON_PLAT_INTERRUPT_LINE == VIRTIO_NET_PLAT_INTERRUPT_LINE）,is that OK? Whether it should be make interrupt line different ? Question2: "_utspace_split_alloc@split.c:272 Failed to find any untyped capable of creating an object at address 0xc0001000 Failed to find device cap for 0xc0001000" According to the print above: a、my PCI region define as below: #define PCI_CFG_REGION_ADDR 0xC1000000 #define PCI_IO_REGION_ADDR 0xC0000000 #define PCI_CFG_REGION_SIZE 0x1000000 #define PCI_IO_REGION_SIZE 0x1000 #define PCI_CFG_BAR_MASK 0xFFFFFFFF I found 'virtio_net_init' and 'virtio_console_init' will call the same function 'install_virtio_vpci_device', net and console will have the same PCI_IO_REGION_ADDR ? is it OK? b、If I want to support two or muti virtio device, which should I add a new macro define for virtio_net in a? for example add PCI_IO_REGION_ADDR for net or add PCI_CFG_REGION_ADDR ? c、Can you give me some list file to change for support for support net and console meanwhile? Thank you very much.

2 2

Adding Platform Support: CAmkES-ARM-VM: VM_Minimal: Raspberry Pi 3b
by Turner, Ben 21 Feb '20

21 Feb '20

Hi, I have been attempting to add support for the Raspberry Pi 3 b platform so that I can run the vm_minimal application on it. The platform supports ARM_HYP, so I believe it should be possible to get this working. I have reached to point where ninja errors on an implicit declaration for `set_gic_vcpu_ctrl_hcr`. From what I understand, this is to do with the ARM Generic Interrupt Controller, however the RPi3b doesn't have a GIC, it has a `bcm2836-armctrl-ic`. This occurs because the file vcpu.h defines an inline function that calls this function, however as the RPi3b doesn't have a GIC, neither the gic_v2.h or gic_v3.h files are provided in the build environment, and hence the build fails. I am unsure what this means in terms of implementation. What needs to be added or changed to get this compiling for the RPi3b? Thanks in advance Ben Turner ________________________________________ Roke Manor Research Limited, Romsey, Hampshire, SO51 0ZN, United Kingdom.Part of the Chemring Group. Registered in England & Wales. Registered No: 00267550 http://www.roke.co.uk _______________________________________ The information contained in this e-mail and any attachments is proprietary to Roke Manor Research Limited and must not be passed to any third party without permission. This communication is for information only and shall not create or change any contractual relationship. ________________________________________

3 9

Announcing new releases: seL4-11.0.0, camkes-3.8.0, CapDL-0.1.0,
by Mcleod, Kent (Data61, Kensington NSW) 20 Feb '20

20 Feb '20

Announcing the releases of seL4, CAmkES, CapDL and updates of other supporting projects. **Note that this announcement refers to a series of release commits that occurred on 19-Nov-2019.** See below for links to release notes. In addition there are new ways to discuss seL4 and trustworthy systems: - seL4 Discourse at <https://sel4.discourse.group>, a forum for attempting to build up an seL4 knowledge base. - seL4 Mattermost at <https://mattermost.ts.data61.csiro.au/sel4-external/> for online messaging. (Signup link can be found on seL4 Discourse:<https://sel4.discourse.group/t/sel4-mattermost-sign-up-link/125> with a valid account). - seL4 RFCs at <https://sel4.atlassian.net/projects/RFC> for open discussion about major changes to the seL4 ecosystem. For more information see: <https://docs.sel4.systems/processes/#contact> Versioned Releases * seL4 11.0.0: The seL4 microkernel <https://docs.sel4.systems/releases/sel4/11.0.0> * CAmkES camkes-3.8.0: Component Architecture for microkernel-based Embedded Systems <https://docs.sel4.systems/releases/camkes/camkes-3.8.0> * CapDL 0.1.0: Collection of tools for generating, parsing and loading CapDL specifications of systems <https://docs.sel4.systems/releases/capdl/0.1.0> Update notes * seL4 Buildsystem: System configuration and building using mostly CMake <https://docs.sel4.systems/updates/buildsystem/11.0.x.html> * seL4Test: Test suite for seL4 <https://docs.sel4.systems/updates/sel4test/11.0.x.html> * sel4bench: sel4bench contains benchmarking applications and a support library for seL4 <https://docs.sel4.systems/updates/sel4bench/11.0.x.html> * user_libs: Userlevel libraries on seL4 <https://docs.sel4.systems/updates/user_libs/11.0.x.html> * The seL4 Run-time: A minimal runtime for running a C or C-compatible process in a minimal seL4 environment <https://docs.sel4.systems/updates/sel4runtime/11.0.x.html> * Elfloader: For preparing the hardware for seL4 on ARM and RISC-V <https://docs.sel4.systems/updates/elfloader/11.0.x.html> * seL4 tutorials: Collection of tutorials for learning to use seL4 and its ecosystem <https://docs.sel4.systems/updates/sel4-tutorials/camkes-3.8.x.html> * camkes-vm: x86 Virtual Machine build as a CAmkES component <https://docs.sel4.systems/updates/camkes-vm/camkes-3.8.x.html> * camkes-arm-vm: Arm Virtual Machine build as a CAmkES component <https://docs.sel4.systems/updates/camkes-arm-vm/camkes-3.8.x.html> * seL4webserver: A reference for implementing applications on seL4 <https://docs.sel4.systems/updates/sel4webserver/camkes-3.8.x.html> An seL4 discourse version of this email can be found at: <https://sel4.discourse.group/t/19-november-2019/126>

1 0

Re: [seL4] Multikernels and resource transfer
by Ge, Qian (Data61, Kensington NSW) 14 Feb '20

14 Feb '20

In a multikernel setup, each kernel manages its own memory allocation, as the main memory is distributed among all valid kernels. Hence, the described scenario does not apply. Regards, Qian. Message: 1 Date: Thu, 13 Feb 2020 00:49:11 -0500 From: Demi Obenour <demiobenour(a)gmail.com> To: devel(a)sel4.systems Subject: [seL4] Multikernels and resource transfer Message-ID: <CAJEMUN_L49O9btYx03Z35uQ6S21T80wPujP86Gd5XyymH4BQ6g(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" In a multikernel, how would retyping work? Obviously, the kernel cannot allow untyped X to be used for page tables if user code on another core might still have write access to it. Would retyping involve some sort of in-kernel concurrency? Obviously, the clustered multikernel avoids this, but making applications (as opposed to low-level libraries and services) work around kernel limitations seems rather unappealing. Sincerely, Demi

1 0