January 2017 - Devel - lists.sel4.systems

seL4 test on x86
by Yevgeny Lavrov 30 Jan '25

30 Jan '25

Hello, I'm new to seL4 and I'm just doing it for learning purpose. I'm trying to run seL4 test suite or simple hello world task from seL4 tutorials on the real hardware. So far I had no problems compiling seL4 test suite and running via QEMU for both x32 and x64 platforms. However, when I try to run it on the actual hardware following Running on real hardware tutorial for x86 I end up with no output at all and no error msgs that can give me a clue on where something went wrong. After compiling seL4test for x86, I ended up with two images in sel4_dir/images/ folder. Copied them over to /boot/sel4/ folder and created a new GRUB2 entry that looks like this menuentry “seL4 test suite” --class os { load video insmod gzio insmod part_msdos insmod ext2 set root=’(hd0,msdos5)’ multiboot /boot/sel4/kernel-ia32-pc99 module /boot/sel4/sel4test-driver-image-ia32-pc99 } update grub, restart and select the new entry from GRUB menu. I end up with blinking cursor on the top-left side of the screen. Please advise.

4 3

Questions about Memory Management in seL4
by Daniel Wang 19 May '23

19 May '23

Hi all, Sorry to bother, I have some basic questions about seL4 memory management. Can someone help me? 1. where is the kernel’s address space? I know there are basically three methods: a) separate virtual address space, e.g. through changing page tables on entry into privileged mode to access b) physical space, e.g. through disable automatic hardware translation of virtual addresses on entry into privilege mode c) privilege region in each process’s virtual address space, e.g. through page table to map kernel address into use-mode process. My question is which of this is being used by seL4 microkernel? 2. Objects like CSpace, VSpace, CNode, TCB, Endpoint, etc. are called kernel objects, but it seems all dynamically allocated in thread running/creating time. Are those objects (e.g. Figure 3.3 in seL4 manual) in kernel space or in user space? 3. I read that after the kernel boot up, it passes all resources, untyped memory to the first thread. Are those untyped memory physical memory or virtual memory in a single page? The reason I ask is I’m learning the code of the UNSW AOS project (two of the assignment projects are implementing frame and papers). I’m confused that before the implementation of frames and pages what kind of memory is passed to the the first thread? I saw int AOS project, it uses ut_table_init(), ut_steal_mem(), I wonder what kind of memory it operates on? Thanks -Dan

5 4

seL4 on Zedboard
by Brandon, Jeffrey - 0553 - MITLL 01 Feb '17

01 Feb '17

Hi, I've been trying to get seL4 running on a Zedboard and I was wondering if there was any documentation on how to boot sle4 from an SD card. I've read http://sel4.systems/pipermail/devel/2016-December/001160.html and https://sel4.systems/Info/Hardware/General/ which mentions using ${loadaddr} but that doesn't seem to be defined on the Zedboard's u-boot. So far I've compiled the image targeting the zynq7000 and used the mkimage command from the general hardware page to try u-boot's fastboot, but fastboot doesn't seem to be available on the zynq either. I am a bit of a novice here. I worry that the solution may be simple but I am currently taking shots in the dark. I wanted to ask this list for any resources you may be aware of for getting sel4 test cases running on the Zed. Thanks for the help, Jeff Brandon 05-53 Secure Resilient Systems and Technology

2 3

arm_data_abort_exception
by Wladislav Wiebe 31 Jan '17

31 Jan '17

Hello, has somebody experience with running into arm_data_abort_exception after enabling the MMU/paging and jumping to the kernel image: .. ELF-loader started on CPU: ARM Ltd. Cortex-A15 r2p4 paddr=[90000000..904b041f] ELF-loading image 'kernel' paddr=[80000000..80033fff] vaddr=[f0000000..f0033fff] virt_entry=f0000000 ELF-loading image 'sel4test-driver' paddr=[80034000..8042dfff] vaddr=[10000..409fff] virt_entry=1e924 Enabling MMU and paging Jumping to kernel-image entry point... check_data_abort_exception() DFAR = 0xfff01014 DFSR = 0x7 ADFSR = 0x0 abort() called. I've dumped the DFAR/DFSR register -- Relevant config parts about the setup: CONFIG_ARCH_ARM_V7A=y CONFIG_ARCH_ARM=y CONFIG_ARCH_AARCH32=y CONFIG_ARM_CORTEX_A15=y CONFIG_PLAT_KEYSTONE=y Thanks in advance! -- WBR, Wladislav WIebe

2 12

Exposing ticks to the rt API
by Corey Richardson 30 Jan '17

30 Jan '17

Hi Anna, While analyzing some time related APIs, I've noticed that the x86 rt kernel assumes that the tsc frequency is constant and well represented by the measurement made at init by comparing against the PIT. It also exposes only microseconds and uses the internal calibration to convert that to/from ticks. I'm concerned about this behavior. The tsc can have up to 200ppm error if uncalibrated and not temperature controlled, from what I'm able to determine. I'd rather have all the public APIs take ticks and allow user space to determine how their timing requirements best correspond to ticks. This came up when wanting to measure how much running time a process/thread has used. Ideally, it's kept as a running count of ticks. In the current API, one can only observe microseconds consumed, converted by a potentially lossy ticksToUs (lossy when the rate isn't exactly known or tick->us conversion isn't an exact integer multiplication). It'd be more useful for me to have tick count directly. I'm also somewhat concerned with using the PIT to estimate the TSC rate, as I can't find anything about expected error of the PIT, and any slop there will influence all future kernel behaviors until reboot. One potential alternative is the ACPI PM timer or the HPET. Those run at higher frequencies, which would help reduce the error bounds on the rate estimation. Let me know what you think! If it's useful at all, I've written up some stuff about the work that inspired these thoughts: https://gitlab.com/robigalia/meta/blob/master/blog/_drafts/2016-12-23-what-… Merry Christmas, -- cmr http://octayn.net/

4 4

strange code in thread.c
by Berkus 30 Jan '17

30 Jan '17

Hi! Details here https://github.com/seL4/seL4/issues/57 do you guys keep an eye on github activity actually or it’s a bad medium for communcation?

2 1

I2C Driver for BeagleBone (AM335x) for CAmkES
by Richard Habeeb 25 Jan '17

25 Jan '17

Hey all, Has anyone setup I2C on a Beaglebone CAmkES application? Is the code in libplatsupport all that's needed? The i2d_id enum doesn't seem to include all the i2c modules ( https://github.com/seL4/libplatsupport/blob/master/plat_include/am335x/plat…) I didn't see an init function for the i2c_bus for am335x; for example, exynos uses the exynos_i2c_init. Any help is appreciated. Thanks, Richard -- Richard Habeeb Research Assistant, Computer Science, USF PGP: https://goo.gl/VhmGGu https://habeebr.bitbucket.io/

1 0

ARM LPAE?
by Wladislav Wiebe 21 Jan '17

21 Jan '17

Hello, I am trying to integrate TI Keystone 2 platform to seL4. What I have done so far is basically an initial port of the Kernel/libs/elfloader/Platform components and introducing a new keystone defconfig. Relevant config parts about the setup: CONFIG_ARCH_ARM_V7A=y CONFIG_ARCH_ARM=y CONFIG_ARCH_AARCH32=y CONFIG_ARM_CORTEX_A15=y CONFIG_PLAT_KEYSTONE=y At the end I am able to generate an image which looks like: $ arm-cortexa15-linux-gnueabihf-readelf -e images/sel4test-driver-image-arm-keystone ELF Header: Class: ELF32 .. Entry point address: 0xc0008000 .. (I am using the same entry point as Linux use it) So far, it stops booting in the elfloader -- output log: .. [ 29.705] ## Starting application at 0xc0008000 ... ELF-loader started on CPU: ARM Ltd. Cortex-A15 r2p4 paddr=[c0008000..c032841f] -> Stop here <- Seems it stops loading @ elf_getMemoryBounds(). I suppose it is related to fact that the physical start address starts @ 0x840000000 which is beyond 32 Bit - so, LPAE support is required. The physical RAM setup looks like: bank 0: addr: 0x840000000 size: 0x17ec5000 (382 MB) bank 1: addr: 0x880000000 size: 0x80000000 (2048 MB) Do you have an idea if this is supposed to be supported on seL4? What should be the "physBase" and the "kernelBase" for such a setup? How should the "static const p_region_t BOOT_RODATA avail_p_regs" looks like? Thanks in advance! -- WBR, Wladislav WIebe

3 10

Re: [seL4] SDHC drivers (cont.)
by Siwei.Zhuang＠data61.csiro.au 20 Jan '17

20 Jan '17

Hi Oak, I tried your code. It works for me except that it seems that you are using old versions of seL4 kernel and libraries. Attached is the code I'm using, I merely add some initialization code to your code. It should work on the latest version of seL4 kernel and related libraries. If the code doesn't work for you. I would suggest, 1. If you are using u-boot, try its mmc command, see if you can access the card. 2. Have a look at the imx6 reference manual, chapter 67.2 and 67.3, check if the host controller is enabled properly. - Siwei ________________________________ From: Norrathep Rattanavipanon <nrattana(a)uci.edu> Sent: Friday, 20 January 2017 6:12 AM To: Zhuang, Siwei (Data61, Kensington NSW) Subject: Re: [seL4] SDHC drivers (cont.) Hi Siwei, Yes, I believe mmc_card_capacity returns the correct value (4026531840 - my microsd is 4GB). And my code does not do any interrupt handling. In fact, that's all the code in the root userspace process (besides initializing vka, vspace and simple objects) and there is no other process. I also tried using a callback as mmc_block_read's argument, instead of using NULL, but it also does not work. On Wed, Jan 18, 2017 at 8:41 PM, <Siwei.Zhuang(a)data61.csiro.au<mailto:Siwei.Zhuang@data61.csiro.au>> wrote: Hi Oak, Do you get the correct card capacity by calling mmc_card_capacity? If you don't, you'd need to check if the hardware is enabled in your bootloader. Are you doing any interrupt handling? As you don't supply a callback function to mmc_block_read, the read function would block until the hardware responses. In this case, mmc_block_read handles the interrupt itself. It would trigger a dead lock if you also handles the interrupt. - Siwei ________________________________ From: Devel <devel-bounces(a)sel4.systems> on behalf of Norrathep Rattanavipanon <nrattana(a)uci.edu<mailto:nrattana@uci.edu>> Sent: Thursday, 19 January 2017 9:54 AM To: Danis, Adrian (Data61, Kensington NSW) Cc: devel(a)sel4.systems; GTS Subject: Re: [seL4] SDHC drivers (cont.) Hi Adrian, Thank you for the reply. I fix it according to what you suggest but it still does not solve the problem (still hang at the same place. Do you have any other suggestions on what I should fix or how I should look into debugging it? Best, Oak On Tue, Jan 17, 2017 at 8:58 PM, <Adrian.Danis(a)data61.csiro.au<mailto:Adrian.Danis@data61.csiro.au>> wrote: Hi Oak, I don't know much about SD cards or this driver but it seems to me like passing it a physical address of 0 isn't what you want, and whilst I know nothing about the mmc hardware it seems reasonable to me that it might hang trying to DMA to memory that doesn't exist. There is also the additional problem that even if paddr was correct for the first page, there is no guarantee that the 5 pages you have allocated are contiguously physically even though they will be mapped contiguous virtually. My recommendation is to use the page dma allocator in seL4_libs/libsel4utils/include/sel4utils/page_dma.h, this will provide you an easy way to allocate/map pages for the purposes of DMA. So instead of void *vaddr = vspace_new_pages(&vspace, seL4_AllRights, 5, seL4_PageBits); uintptr_t paddr = 0; You would have ps_dma_man_t dma_man; error = sel4utils_new_page_dma_alloc(&vka, &vspace, &dma_man); void *vaddr = ps_dma_alloc(&dma_man, 5 * PAGE_SIZE_4K, PAGE_SIZE_4K, 0, PS_MEM_NORMAL); uintptr_t paddr = ps_dma_pin(&dma_man, vaddr, 5 * PAGE_SIZE_4K); As I said at the start, I don't know if this will actually fix your current problem, but it's still something you will need to fix. Adrian On Wed 18-Jan-2017 6:31 AM, Norrathep Rattanavipanon wrote: My apology that I have to continue the discussion from the old thread: (http://sel4.systems/pipermail/devel/2016-October/001056.html) My goal is to read and write data from/to micro sd in SabreLite platform. I tried both Adrain and Anna's suggestions in that thread and they dont seem to fix the problem. Nothing returns error and I also changed cacheable parameter in sel4utils_new_pages_at_vaddr to 0 (I believe this is what Anna meant instead of setting 3rd argument of vspace_new_pages). The code's still stuck inside mmc_block_read function. I tracked it down and it seems like BRR and BWR interrupt statuses are never set to 1 I add my code below, please let me know if anything is wrong with my code. ps_io_mapper_t io_mapper = {0}; error = sel4platsupport_new_io_mapper(simple, vspace, vka, &io_mapper); assert(error == 0); ps_io_ops_t io_ops = { .io_mapper = io_mapper }; sdio_host_dev_t* dev = (sdio_host_dev_t*) malloc(sizeof(*dev)); assert(dev != NULL); memset(dev, 0, sizeof(*dev)); enum sdio_id id = sdio_default_id(); // return id=3 error = sdio_init(id, &io_ops, dev); assert(error == 0); mmc_card_t* mmc_card = (mmc_card_t*) malloc(sizeof(*mmc_card)); error = mmc_init(dev, &io_ops, mmc_card); assert(error == 0 && mmc_card != NULL); void *vaddr = vspace_new_pages(&vspace, seL4_AllRights, 5, seL4_PageBits); assert(vaddr != NULL); uintptr_t paddr = 0; printf("mmc card capacity %llu bytes\n", mmc_card_capacity(*mmc_card)); long read_len = mmc_block_read(*mmc_card, 0x50000, 1, vaddr, paddr, NULL, NULL); // Stuck here printf("read %lu bytes\n", read_len); Thanks Oak -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine _______________________________________________ Devel mailing list Devel(a)sel4.systems<mailto:Devel@sel4.systems> https://sel4.systems/lists/listinfo/devel -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine

1 0

seL4 System Utilization / Benchmark
by Andrew Gacek 20 Jan '17

20 Jan '17

Hi, I'm interested in seeing how much of the CPU is being used by the various threads in my (camkes) application. I'd like a simple "Task Manager" style report of the form: 70% idle 25% can_obj_7_0_control_9_tcb 5% can_obj_7_Int_3_0000_tcb 0% can_obj_7_0_fault_handler_15_0000_tcb etc I've tried poking around libsel4bench, but I don't see any obvious way of benchmarking the whole system. From what I can tell, it's mostly designed to get cycle counts from specific code segments. Is that right? What's the best way to go about benchmarking the whole system? It's only for debugging, so I'm willing to make some quick-and-dirty changes to the kernel just to see the results. Thanks, Andrew

4 11

SDHC drivers (cont.)
by Norrathep Rattanavipanon 19 Jan '17

19 Jan '17

My apology that I have to continue the discussion from the old thread: ( http://sel4.systems/pipermail/devel/2016-October/001056.html) My goal is to read and write data from/to micro sd in SabreLite platform. I tried both Adrain and Anna's suggestions in that thread and they dont seem to fix the problem. Nothing returns error and I also changed cacheable parameter in sel4utils_new_pages_at_vaddr to 0 (I believe this is what Anna meant instead of setting 3rd argument of vspace_new_pages). The code's still stuck inside mmc_block_read function. I tracked it down and it seems like BRR and BWR interrupt statuses are never set to 1 I add my code below, please let me know if anything is wrong with my code. ps_io_mapper_t io_mapper = {0}; error = sel4platsupport_new_io_mapper(simple, vspace, vka, &io_mapper); assert(error == 0); ps_io_ops_t io_ops = { .io_mapper = io_mapper }; sdio_host_dev_t* dev = (sdio_host_dev_t*) malloc(sizeof(*dev)); assert(dev != NULL); memset(dev, 0, sizeof(*dev)); enum sdio_id id = sdio_default_id(); // return id=3 error = sdio_init(id, &io_ops, dev); assert(error == 0); mmc_card_t* mmc_card = (mmc_card_t*) malloc(sizeof(*mmc_card)); error = mmc_init(dev, &io_ops, mmc_card); assert(error == 0 && mmc_card != NULL); void *vaddr = vspace_new_pages(&vspace, seL4_AllRights, 5, seL4_PageBits); assert(vaddr != NULL); uintptr_t paddr = 0; printf("mmc card capacity %llu bytes\n", mmc_card_capacity(*mmc_card)); long read_len = mmc_block_read(*mmc_card, 0x50000, 1, vaddr, paddr, NULL, NULL); // Stuck here printf("read %lu bytes\n", read_len); Thanks Oak -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine

3 3

CAmkES Templates
by Chris Guikema 19 Jan '17

19 Jan '17

Hello, I am working on a CAmkES application attempting to build a seL4 Network Stack. I am basing this on the CAmkES-VM and utilizing UDP Protocol with the lwIP library. During my build process, I get quite a few linking errors like this: undefined reference to `pbuf_alloc' This is odd, because in the templates, the proper header files are being linked in. There are also warnings like this: Warning: no template for ethdriver_1.to.source Even though the connection does exist: connection seL4Ethdriver eth_driver(from router.ethdriver, to ethdriver.client); Is there something obvious I am doing wrong? Thanks Chris

2 2

questions about SMMU on TK1 VMM
by PX 18 Jan '17

18 Jan '17

Hi, I have some questions about the SMMU on the new version of TK1 VMM as follows: 1. In the source code, smmu.c, the IO ASID 1 is assigned to hardware engine, AFI, which is supposed to connect with PCIE devices. However, when I add 1 to vm.smmu in vm.camkes, the VM can not access Ethernet and cause a SMMU translation error. But it works if I add 0 to vm.smmu as suggested by Kent. whats the reason to do so? 2. Each IO device is assigned with an IO space mapping. However, there is no IO ASID associated with these mappings. Does that means these mappings are associated with an IO ASID in the order given in vm.smmu? 3. Is it possible for the VMM to change the IO mapping for a specific device? say, invalidate old mapping and load a new mapping? what's the rough idea to do so? thanks Peng

2 1

questions about PCIE SMMU for tk1 vmm
by PX 16 Jan '17

16 Jan '17

Hi, I am confused by the SMMU management for PCIE device in the updated TK1 VMM. The IO ASID for PCIE device is 0. However, the start IO ASID is from 1 as defined in smmu.h. When initialized, the lookup table, smmu_ioasid_to_pd, has no entry for IO asid 0 at all. I don't understand how the page table for PCIE device is generated and used by SMMU? which part source code should I check ? thanks Peng

2 1

Re: [seL4] quesitons about TK1 VMM
by Kent.Mcleod＠data61.csiro.au 14 Jan '17

14 Jan '17

Hi Peng, Adding the ethernet card requires adding the 0 ASID in the vm.camkes file that I mentioned in the previous email. vm.smmu = [0, 10, 24]; This gives permission for PCIE devices to read and write to memory. I confirmed that on the TK1 Jetson the ethernet port works after this change. You may need to run "ifconfig eth0 up" to enable the device once the image boots. Regards, Kent. ? ________________________________ From: PX <seawolf.peng(a)gmail.com> Sent: Friday, January 13, 2017 12:13 PM To: Mcleod, Kent (Data61, Kensington NSW) Subject: Re: quesitons about TK1 VMM Kent, I am using NVIDIA Jetson TK1 board. The reason I want to use insecure config is to enable VM Linux to use Ethernet port. I do not care about the SD card. How can I just add Ethernet card? is there a way for me to avoid adding SD card to The VM linux as you just suggest in your email? Thanks Peng On Thursday,January 12, 2017, <Kent.Mcleod(a)data61.csiro.au<mailto:Kent.Mcleod@data61.csiro.au>> wrote: Hi Peng, Which hardware are you using to run the image? This project has only been tested on the TK1-SOM made by Colorado Engineering. The ethernet port doesn't work as the version of Linux that we use doesn't support it. As for your second question, we configure the IOMMU to only let Linux use the emmc device and USB device on the TK1-SOM. The error is caused because Linux is trying to access a SD card device that it isn't authorized to access. The TK1-SOM doesn't have any SD card hardware so camkes doesn't set up access. If you want to use the Insecure config then you will need to modify apps/vm/vm.camkes and add the right ID to vm.smmu on line 443. To find out which ID to add we take the ID:98 from your Address translation error and look it up in the TK1 technical reference manual. In the memory controller section of the manual there is a "Error Data Capture: Status" section that starts on page 716. Using the table there you can look up ID:98 to see that it belongs to the SWGROUP sdmmc3a. We can now take this and look in seL4 ("kernel/include/plat/tk1/plat/machine/smmu.h?") to find the relevant ASID. From the list of ASIDs we see that SMMU_SDMMC3A_ASID is defined as 23. This is the ID that needs to be added to the vm.smmu array in vm.camkes. Hope this helps, Regards, Kent. ________________________________ From: Devel <devel-bounces(a)sel4.systems> on behalf of PX <seawolf.peng(a)gmail.com> Sent: Friday, January 13, 2017 9:03 AM To: devel(a)sel4.systems Subject: [seL4] quesitons about TK1 VMM Hi, I built a TK1 ARM VMM image from the source code SEL4PROJ/camkes-vm-manifest in GitHub. I have some quesitons about the tk1_vmlinux. Question 1: If I use the original tk1_vm_defconfig, the eth0 does not work in vm. Is the tk1_vm_linux in default not supposed to access Ethernet card? Hpw do I access Ethernet card in this case? Question 2: If I change the VM conifg into insecure, CONFIG_TK1_INSECURE=y, the VM can not get booted, I get "SMMU address translation error". The error message is appended as follows: " [ 10.503932] mmc1: Invalid maximum block size, assuming 512 bytes [ 10.566465] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit SMMU Address translation error: ID: 98 address: 0xae609000 type: 6 direction: 0x0 IOPT permission: read 0x0 write 0x0 nonsecure 0x0 [ 10.617123] mmc1: ADMA error" Is this error caused by bugs in source code or my wrong config? if the later case, what's the correct config? thanks Peng

2 1

quesitons about TK1 VMM
by PX 13 Jan '17

13 Jan '17

Hi, I built a TK1 ARM VMM image from the source code SEL4PROJ/camkes-vm-manifest in GitHub. I have some quesitons about the tk1_vmlinux. Question 1: If I use the original tk1_vm_defconfig, the eth0 does not work in vm. Is the tk1_vm_linux in default not supposed to access Ethernet card? Hpw do I access Ethernet card in this case? Question 2: If I change the VM conifg into insecure, CONFIG_TK1_INSECURE=y, the VM can not get booted, I get "SMMU address translation error". The error message is appended as follows: " [ 10.503932] mmc1: Invalid maximum block size, assuming 512 bytes [ 10.566465] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit SMMU Address translation error: ID: 98 address: 0xae609000 type: 6 direction: 0x0 IOPT permission: read 0x0 write 0x0 nonsecure 0x0 [ 10.617123] mmc1: ADMA error" Is this error caused by bugs in source code or my wrong config? if the later case, what's the correct config? thanks Peng

1 0

question about SEL4PROJ /camkes-arm-vm-manifest
by PX 13 Jan '17

13 Jan '17

Hi, all I try to build a TK1 ARM VMM image from the source code SEL4PROJ/camkes-vm-manifest in GitHub. However, I can not compile it. I get errors when the compiler tries to build "camkes-accelerator" . I don't put any new code yet. I just: 1) repo init the url ; 2) repo sync; 3) make tk1_vm_defconfig; and 4) make. Did I do something wrong here? thanks Peng

2 5

Overly eager xsave size rejection
by Corey Richardson 12 Jan '17

12 Jan '17

in src/arch/x86/machine/fpu.c:140 on 4.0.0, there is > if (x86_cpuid_ebx(0x0d, 0x0) != CONFIG_XSAVE_SIZE) { > printf("XSAVE buffer set set to %d, but should be %d\n", CONFIG_XSAVE_SIZE, x86_cpuid_ebx(0x0d, 0x0)); > return false; > } I want to force a large(r than 576) xsave region so that TCBBits is always 11, to help my userspace be vaguely more kernel-config-independent. I don't think it's a problem if the xsave buffer in the TCB is larger than the hardware will actually use? I also think this is buggy. Shouldn't it be querying ecx, since things like AVX aren't enabled in the kernel? To be clear, this is my suggested change: > if (x86_cpuid_ecx(0x0d, 0x0) > CONFIG_XSAVE_SIZE) { > printf("XSAVE buffer set set to %d, but should be at least %d\n", CONFIG_XSAVE_SIZE, x86_cpuid_ecx(0x0d, 0x0)); > return false; > } -- cmr http://octayn.net/ +16038524272

2 5

question about SEL4PROJ /camkes-arm-vm-manifest
by PX 12 Jan '17

12 Jan '17

Hi, all I posted this question yesterday, and get no answer. Let me to be more specific this time. I try to build a TK1 ARM VMM image from the source code SEL4PROJ/camkes-vm-manifest in GitHub. However, I can not compile it. I get errors when the compiler tries to parse capDL. The errors are appended as follows: " make: Entering directory '/home/dev/Documents/new_vmm/projects/capd /capDL-tool' stack setup make: stack: Command not found Makefile:37: recipe for target 'sandbox' failed make: *** [sandbox] Error 127 make: Leaving directory '/home/dev/Documents/new_vmm/projects/capdl/capDL-tool' Makefile:51: recipe for target '/home/dev/Documents/new_vmm/stage/arm/tk1/parse-capDL/parse-capDL' failed " I checked that there is a file called stack.ymal in the directory: ~/capdl/capDL-tool. My system is also installed latest ghc and ghc-prof. Anybody can help me on this problem? Thanks Peng

3 3

Using the seL4 Benchmark Tool
by Chris Guikema 12 Jan '17

12 Jan '17

Hello, I am currently attempting to use the seL4 Benchmark tool. After going through the menuconfig (kernel -> build options -> Enable Benchmarks -> Track threads and kernel utilization time), I attempt to rebuild, and get a host of errors: In file included from /home/chrisguikema/gdbtest/kernel/include/compound_types.h:16:0, from /home/chrisguikema/gdbtest/kernel/include/types.h:15, from /home/chrisguikema/gdbtest/kernel/src/api/faults.c:14: /home/chrisguikema/gdbtest/kernel/include/object/structures.h:249:5: error: unknown type name 'benchmark_util_t' benchmark_util_t benchmark; And a lot more, but all along the "not a structure or union" line, which makes me think that either the header file isn't being linked properly, or the #ifdefs aren't working for everything. Did I do something improperly in my setup? Thanks, Chris Guikema

2 1

Workshop debrief?
by Jeff Waugh 10 Jan '17

10 Jan '17

Hey there, I might be hoping a little too much for video, but will there be slides and notes from the Workshop? (Particularly interested in the gaps discussion.) Would be handy content on the wiki. :-) Thanks, Jeff

3 4

config-independent object type numbers
by Corey Richardson 10 Jan '17

10 Jan '17

Right now, object type numbers vary based on the kernel config (eg, CONFIG_VTX) etc. This is a huge source of pain for the Rust userspace libraries which don't integrate with seL4's build system. Is it possible for those enums to explicitly label every potential object type for a given architecture with a fixed number? -- cmr http://octayn.net/ +16038524272

2 2

seL4 as Xen guest / AWS
by Tony Arcieri 10 Jan '17

10 Jan '17

Has anyone managed to run seL4 as a Xen HVM guest? I was more specifically curious about running seL4 on an EC2 instance. I was curious about the possibility of using seL4 as the host OS for a "unikernel"-like deployment of a Rust application split into a small set of services living in different capability spaces (e.g. network, key storage / crypto) -- Tony Arcieri

3 3

sel4test 4.0.x.xml broken?
by Corey Richardson 09 Jan '17

09 Jan '17

It seems that the line <project name="seL4.git" path="kernel" revision="4.0.x-compatible"/> should be <project name="seL4.git" path="kernel" revision="4.0.0"/> Either that, or a tag is missing from the kernel repo. -- cmr http://octayn.net/ +16038524272

2 1

questions about the vgic maintenance for sel4 TK1 ARM VMM
by PX 09 Jan '17

09 Jan '17

Hi, all I have questions about the vgic maintenance for sel4 tk1 ARM VMM. When the VM acknowledges an IRQ, an exception is raised and is delivered to the VMM. Could someone explain how seL4 intercepts the VM ack? How is this exception is raised ? I am confused because the VM is supposed to totally control the MMIO of the device and can write any thing to the device. How can seL4 be triggered in this case? Which part of source code allows seL4 to intercept the VM ack? Thanks Peng

2 1

Interest in 32-bit x86 Rust userspace?
by Corey Richardson 07 Jan '17

07 Jan '17

Is anyone interested at all in the 32-bit x86 Rust userspace libraries? I'm considering dropping support for them, as I don't personally plan to have any support for them in Robigalia, instead focusing on x86_64. Note that this wouldn't impact any Rust CAmkES components using the support in the sel4 buildsystem, just the sel4-sys, rust-sel4, etc crates. -- cmr http://octayn.net/ +16038524272

1 0

DMA driver in VM
by PX 07 Jan '17

07 Jan '17

Hi, I have a generic question about DMA driver in the VM on sel4. How does the device driver in the vm put physical address in the DMA controller given that there is no emulation in sel4? I worked on TK1 sel4 hypervisor extention version, but cannot find any address translation from vmm. Thanks Peng

1 0

pic/no-pic and some other questions
by Vasily A. Sartakov 06 Jan '17

06 Jan '17

Greetings. I have merged MIPS port with 4.0.0 release. Now I would like to clean up my code and need to remove many small issues that I did not fix during the porting before making the code public. In fact, most of the current problems are related to toolchains: 1. The first problem is a position independent code. Could you please describe me seL4' vision about it? muclibs is building with -fPIC, but everything else doesn't, right? I have a very tricky set of GCC’ flags, related to MIPS’ GOT, small data, abicalls, pic/non-pic, etc, and many of them are not working together. 2. MIPS assembler has several features, one of them is that the -O0 code requires having an addition space above the top of the stack for 4 registers: > 43b610: 27bdffe8 addiu sp,sp,-24 <— start of the function > 43b614: afbf0014 sw ra,20(sp) > 43b618: afbe0010 sw s8,16(sp) > 43b61c: afb0000c sw s0,12(sp) > 43b620: 03a0f021 move s8,sp <— frame stack > 43b624: afc40018 sw a0,24(s8) <— save 1st arg for a subroutine call > 43b628: afc5001c sw a1,28(s8) <— save 2nd arg for the subroutine > 43b62c: afc60020 sw a2,32(s8) <— save 3rd arg for the subroutine So, each time when I am allocating new stack I should return not top of the stack, but top_of_the_stack - 4*sizeof(seL4_Word). As result, sel4utils_configure_thread_config becomes platform specific. Could you please consider a possibility to put it into the «arch» as sel4utils_arch_init_context, or add something like «sel4utils_arch_configure». Also, it is important: this is an issue only for -O0 code, as far I see, -O2 uses different methods for arguments passing. I am trying to build toolchains which do not use frame pointer this style for -O0 code, but I am not sure about the result. 3. I really like how you redesigned declaration syscalls. Now I have a freedom to modify syscalls and do not care about the mainline declarations because now there are syscall wrappers. However, my toolchain generates very poor code for CONFIG_LIB_SEL4_PUBLIC_SYMBOLS and «DEFAULT» — I have proper working code only for CONFIG_LIB_SEL4_INLINE_INVOCATIONS. What is the conceptual difference of these declaration attributes, what they affect? 4. Could you please tell me what was the C equivalent of this asm code: .global __syscall .type __syscall,%function __syscall: sub sp, sp, #4 push {r5,r6} adr r5, 1f ldr r6, 1f ldr r5, [r5,r6] str r5, [sp, #8] pop {r5, r6} pop {pc} .hidden __sysinfo 1: .word __sysinfo-1b something similar to __syscall6 from libmuslc/arch/<arch>_sel4/syscall_arch.h, right? Thank you. P/s Happy new year/merry xmass/happy holidays! -- Vasily A. Sartakov sartakov(a)ksyslabs.org

2 2

xsave region size for haswell/broadwell?
by Corey Richardson 06 Jan '17

06 Jan '17

Does anyone have a "maximal" xsave region size big enough for all the xsave-supporting features seL4 enables on Broadwell or Haswell? I don't have access to a machine with these features, so I can't run a program to get them with cpuid. -- cmr http://octayn.net/ +16038524272

2 1

questions about the address translation for a DMA driver in the ARM VM
by PX 05 Jan '17

05 Jan '17

Hi, all Happy new year! I have some urgent questions about address translation for a DMA driver in the ARM seL4-based VM. Your quick response is highly appreciated! 1. In the ARM sel4-based VM, the MMIO of a device is directly exposed to the device driver in the VM. When the DMA device driver allocates a DMA buffer to a device controller, the device driver can directly tell the real controller the IPA of the buffer starting address, instead of the real physical address. In other words, the device controller can only get the IPA of the buffer starting address. How can this device controller perform DMA without knowing the real PA of the buffer? Does seL4 perform some emulation here? How? 2. A closely related question to 1: when we develop a DMA driver in the VMM space, we put the real physical address of the device descriptor and real physical address of the DMA buffer in the controller registers through its MMIO. We found that the controller cannot find the correct place for the descriptor and the buffer. Do the seL4 hypervisor perform the address translation? If so, which source code does that? Thanks Peng

2 3

Build Error
by Daniel Romero 05 Jan '17

05 Jan '17

Hi, I am currently on a BeagleBone running Ubuntu 14.04 using gcc-arm-none-eabi. However I am getting the following error running 'make' after 'make menuconfig'. I am wondering if someone can guide me in the right direction [libs/libsel4] building... [GEN] include/sel4/types_gen.h Traceback (most recent call last): File "/home/ubuntu/seL4test/libs/libsel4/tools/bitfield_gen.py", line 26, in <module> from six.moves import range ImportError: No module named six.moves make[1]: *** [include/sel4/types_gen.h] Error 1 make: *** [libsel4] Error 2 Thank you, Hector Daniel Romero hdromero93(a)gmail.com

2 1

seL4test on Odroid-XU4
by Yevgeny Lavrov 05 Jan '17

05 Jan '17

Hello I ran into the following issue while running seL4test suite on Odroid-XU4: Exynos5422 # fatload mmc 0 0x48000000 sel4test-driver-image-arm-exynos5 there are pending interrupts 0x00000001 reading sel4test-driver-image-arm-exynos5 3149364 bytes read Exynos5422 # bootelf 0x48000000 ## Starting application at 0x41000000 ... ELF-loader started on CPU: ARM Ltd. Cortex-A7 r0p3 Switching CPU... ELF-loader started on CPU: ARM Ltd. Cortex-A15 r2p3 paddr=[41000000..4130441f] ELF-loading image 'kernel' paddr=[60000000..60037fff] vaddr=[e0000000..e0037fff] virt_entry=e0000000 ELF-loading image 'sel4test-driver' paddr=[60038000..60411fff] vaddr=[10000..3e9fff] virt_entry=1e74c Enabling MMU and paging Jumping to kernel-image entry point... Bootstrapping kernel Kernel init: Too many untyped regions for boot info Kernel init: Too many untyped regions for boot info Kernel init: Too many untyped regions for boot info .... 1 untypeds of size 10 1 untypeds of size 11 126 untypeds of size 12 2 untypeds of size 13 3 untypeds of size 14 3 untypeds of size 15 5 untypeds of size 16 3 untypeds of size 17 3 untypeds of size 18 3 untypeds of size 19 3 untypeds of size 20 2 untypeds of size 21 2 untypeds of size 22 1 untypeds of size 23 2 untypeds of size 24 2 untypeds of size 25 2 untypeds of size 26 2 untypeds of size 27 1 untypeds of size 29 Switching to a safer, bigger stack... seL4 Test ========= _allocman_utspace_alloc@allocman.c:301 Regular utspace alloc failed and not watermark for size 31 type 0 vka_alloc_object_at@object.h:57 Failed to allocate object of size 2147483648, error 1 _allocman_utspace_alloc@allocman.c:301 Regular utspace alloc failed and not watermark for size 30 type 0 vka_alloc_object_at@object.h:57 Failed to allocate object of size 1073741824, error 1 _allocman_utspace_alloc@allocman.c:301 Regular utspace alloc failed and not watermark for size 29 type 0 vka_alloc_object_at@object.h:57 Failed to allocate object of size 536870912, error 1 ..... _utspace_split_alloc@split.c:247 Failed to find any untyped capable of creating an object at address 0x12dd0000 vka_alloc_object_at@object.h:64 Failed to allocate object of size 4096 at paddr 0x12dd0000, error 1 init_timer_caps@main.c:348 [Cond failed: error] Failed to get untyped at paddr 0x12dd0000 for timer Ignoring call to sys_rt_sigprocmask Ignoring call to sys_gettid sys_tkill assuming self kill HYP mode is enabled, and seL4test suite is compiled in Debug Mode. Prior to running seL4test, I ran code from seL4 tutorials and those ran w/o any problems. Any suggestions on what I might have done wrong? Thanks

3 4

Exposing TSD on x86
by Corey Richardson 03 Jan '17

03 Jan '17

How do people feel about exposing the TSD (time-stamp disable) bit as a piece of state on the TCB? Ideally it'd be lazily switched. I vaguely want this in Robigalia for disabling access to real time in non-sufficiently-privileged processes. Best, -- cmr http://octayn.net/ +16038524272

2 2