Devel

devel@sel4.systems

9 participants
1391 discussions

RELEASE: seL4 3.2.0 release
by Parthasarathi Susarla 18 Jul '16

18 Jul '16

We are pleased to announce the release of 3.2.0 of seL4. This release contains the following changes: * ARM Hypervisor support. * ARM Jetson-TK1: Cleanup. * Benchmarking now supports tracking of syscalls. * Support for XSAVE feature set for x86 CPUs. * Simplified ARM platform selection during configuration. = ABI Changes = * seL4_BootInfo has a new entry for IOSpace caps for ARM SMMU. The release tarballs can be directly downloaded from: https://github.com/seL4/seL4/archive/3.2.0.tar.gz 7210ecc65f0f8a04490605e92f7b89b4 3.2.0.tar.gz The manual for this release can be downloaded here: http://sel4.systems/Info/Docs/seL4-manual-3.2.0.pdf Please let us know of any issues that you run into by creating an issue in the issue tracker: https://github.com/seL4/seL4/issues -- Partha Susarla <parthasarathi.susarla(a)nicta.com.au> ________________________________ The information in this e-mail may be confidential and subject to legal professional privilege and/or copyright. National ICT Australia Limited accepts no liability for any damage caused by this email or its attachments.

1 0

verification requirements
by Gergely Buday 13 Jul '16

13 Jul '16

Hi, what are the requirements for running the whole sel4 verification proof? Is 32G RAM and 20G disk space enough? How about the processor needs? I guess what is enough in batch mode will be enough for interactive development. - Gergely

2 1

Frame buffer
by Rinat Dobrokhotov 09 Jul '16

09 Jul '16

Hello, Could you tell me if framebuffer is released for seL4? -- Best Regards, Rinat Dobrokhotov

6 7

[sel4] persistent storage / file system
by rahul mahadev 06 Jul '16

06 Jul '16

Hi, I wanted to know if persistent storage/ file system have been tried on sel4 before ,if so can I have more details on it. Regards , Rahul S Mahadev

5 5

Capabilities of binary images
by Norrathep Rattanavipanon 06 Jul '16

06 Jul '16

Hi, I need to access the user image from a user application for verifying that the binary is installed correctly. So I found in bootinfo.h that it contains userImageFrames and its supposed to be the one I'm looking for but it gave me an error when I map the frames via vspace_map_pages(vspace, info->userImageFrames.start, ...) at the root task. The error is : ERROR:sel4utils_map_page_pd:223: Error mapping pages, bailing: 2 What am I doing wrong here? Best, Oak -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine

3 2

Get real time clock data (and timer) from I.MX6
by Norrathep Rattanavipanon 30 Jun '16

30 Jun '16

Hi, I was wondering if there's any real time clock implementation for I.MX6 in sel4. And if there isnt any, what would be the best way to use a timer in sel4 (since I saw many implementations of those)? through sel4platsupport_get_default_timer? Best, Oak -- Norrathep (Oak) Rattanavipanon M.S. in Computer Science University of California - Irvine

2 5

ARM Hypervisor extensions in master
by Adrian Danis 28 Jun '16

28 Jun '16

The ARM hypervisor extensions are now supported in the master seL4 kernel. This support has existed on a public development branch (arm_hyp) for some time, but this marks the beginning of proper support and a verification target. What is done: * Hypervisor extensions supported on odroid-xu and Jetson TK1 platforms * SystemMMU supported on Jetson TK1 platform Limitations: * Currently any usage of hyp extensions or SystemMMU is *not* verified * SystemMMU contains work around currently for the VMM to map in large amounts of memory (fix for this relies on a kernel change currently being verified) You can use the manifest https://github.com/seL4proj/camkes-arm-vm-manifest to get the project https://github.com/seL4proj/camkes-arm-vm and then use one of the two default configs for the TK1 and odroid-xu platforms. Adrian ________________________________ The information in this e-mail may be confidential and subject to legal professional privilege and/or copyright. National ICT Australia Limited accepts no liability for any damage caused by this email or its attachments.

1 0

camkes-VM with QEMU and virutal PCI device
by Samuel Weiser 28 Jun '16

28 Jun '16

Hi again, I'm playing around with camkes-vm in QEMU+KVM. I want to add a virtual PCI device to Linux, which is running as vm0 on top of seL4. However, I got stuck with some errors during system boot. My setup is as follows: QEMU is configured to share a 1MB memory region between the host and the QEMU guest (seL4). Here's what QEMU sets up: (qemu): info mtree ... 00000000fe000000-00000000fe0fffff (prio 1, RW): ivshmem-bar2-container 00000000fe000000-00000000fe0fffff (prio 0, RW): ivshmem.bar2 00000000febf1000-00000000febf10ff (prio 1, RW): ivshmem-mmio ... (qemu): info pci ... Bus 0, device 4, function 0: RAM controller: PCI device 1af4:1110 IRQ 11. BAR0: 32 bit memory at 0xfebf1000 [0xfebf10ff]. BAR2: 64 bit prefetchable memory at 0xfe000000 [0xfe0fffff]. id "" ... I adapted a previously working configuration (optiplex9020.camkes) accordingly with what I thought should be correct. Especially, I added vm0_config.pci_devices_iospace and vm0_config.pci_devices as well as the PCI irq. Here's the configuration: configuration { VM_CONFIGURATION_DEF() VM_PER_VM_CONFIG_DEF(0, 2) vm0.simple_untyped24_pool = 12; vm0.heap_size = 0; vm0.guest_ram_mb = 1536; vm0.kernel_cmdline = VM_GUEST_CMDLINE; vm0.kernel_image = C162_KERNEL_IMAGE; vm0.kernel_relocs = C162_KERNEL_IMAGE; vm0.initrd_image = C162_ROOTFS; vm0.iospace_domain = 0x00; vm0_config.ram = [ [ 0x20800000, 23 ], [ 0x21000000, 24 ], [ 0x22000000, 25 ], [ 0x24000000, 26], [ 0x28000000, 27], [0x30000000, 28], [0x40000000, 29] , [0x60000000, 30], [0xa0000000, 28]]; vm0_config.ioports = [ {"start":0x2f8, "end":0x2ff, "pci_device":0, "name":"COM2 Serial Port"}, {"start":0x2e8, "end":0x2ef, "pci_device":0, "name":"COM4 Serial Port"} ]; vm0_config.irqs = [ {"name":"Serial", "source":3, "level_trig":0, "active_low":0, "dest":3}, {"name":"PCI", "source":11, "level_trig":1, "active_low":1, "dest":11} ]; vm0_config.pci_devices_iospace = 1; vm0_config.pci_devices = [ {"name":"PCI", "bus":0, "dev":0x04, "fun":0, "irq":"PCI", "memory":[ {"paddr":0xfe000000, "size":0x100000, "page_bits":12}, ], }, ]; } However, after creating the MMIO frames and doing some other stuff, the boot process fails, as shown below. The error also occurs if I change or completely remove just the "memory" definition of my PCI device. I also tried different values for "iospace_domain" (QEMU should use 0 as default PCI domain). Thanks in advance for any hints and ideas! Best, Sammey Starting Loader... Parsing bootinfo... 1041793 free cap slots, from 6783 to 1048576 Untyped memory (24) 0x0000000000100000 - 0x0000000000108000 0x0000000000108000 - 0x0000000000109000 0x0000000003000000 - 0x0000000004000000 0x0000000004000000 - 0x0000000008000000 0x0000000008000000 - 0x0000000010000000 0x0000000010000000 - 0x0000000018000000 0x0000000018000000 - 0x000000001c000000 0x000000001c000000 - 0x000000001e000000 0x000000001e000000 - 0x000000001f000000 0x000000001f000000 - 0x000000001f800000 0x000000001f800000 - 0x000000001fc00000 0x0000000001b6b000 - 0x0000000001b6c000 0x0000000001b6c000 - 0x0000000001b70000 0x0000000001b70000 - 0x0000000001b80000 0x0000000001b80000 - 0x0000000001c00000 0x0000000001c00000 - 0x0000000001e00000 0x0000000001e00000 - 0x0000000001f00000 0x0000000001f00000 - 0x0000000001f80000 0x0000000001f80000 - 0x0000000001fc0000 0x0000000001fc0000 - 0x0000000001fe0000 0x0000000001fe0000 - 0x0000000001ff0000 0x0000000001ff0000 - 0x0000000001ff2000 0x0000000001ff2000 - 0x0000000001ff3000 0x0000000001ff3000 - 0x0000000001ff3800 Loader is running in domain 0 Device untyped memory (30) 0x0000000000001000 - 0x0000000000002000 0x0000000000002000 - 0x0000000000004000 0x0000000000004000 - 0x0000000000008000 0x0000000000008000 - 0x0000000000010000 0x0000000000010000 - 0x0000000000020000 0x0000000000020000 - 0x0000000000040000 0x0000000000040000 - 0x0000000000080000 0x0000000000080000 - 0x0000000000100000 0x000000001fc00000 - 0x0000000020000000 0x0000000020001000 - 0x0000000020002000 0x0000000020002000 - 0x0000000020004000 0x0000000020004000 - 0x0000000020008000 0x0000000020008000 - 0x0000000020010000 0x0000000020010000 - 0x0000000020020000 0x0000000020020000 - 0x0000000020040000 0x0000000020040000 - 0x0000000020080000 0x0000000020080000 - 0x0000000020100000 0x0000000020100000 - 0x0000000020200000 0x0000000020200000 - 0x0000000020400000 0x0000000020400000 - 0x0000000020800000 0x0000000020800000 - 0x0000000021000000 0x0000000021000000 - 0x0000000022000000 0x0000000022000000 - 0x0000000024000000 0x0000000024000000 - 0x0000000028000000 0x0000000028000000 - 0x0000000030000000 0x0000000030000000 - 0x0000000040000000 0x0000000040000000 - 0x0000000060000000 0x0000000060000000 - 0x00000000a0000000 0x00000000a0000000 - 0x00000000e0000000 0x00000000e0000000 - 0x0000000000000000 Sorting untypeds... Untyped 0 (cptr=1a39) is of size 15. Placing in slot 17... Untyped 1 (cptr=1a3a) is of size 12. Placing in slot 20... Untyped 2 (cptr=1a3b) is of size 24. Placing in slot 5... Untyped 3 (cptr=1a3c) is of size 26. Placing in slot 2... Untyped 4 (cptr=1a3d) is of size 27. Placing in slot 0... Untyped 5 (cptr=1a3e) is of size 27. Placing in slot 1... Untyped 6 (cptr=1a3f) is of size 26. Placing in slot 3... Untyped 7 (cptr=1a40) is of size 25. Placing in slot 4... Untyped 8 (cptr=1a41) is of size 24. Placing in slot 6... Untyped 9 (cptr=1a42) is of size 23. Placing in slot 7... Untyped 10 (cptr=1a43) is of size 22. Placing in slot 8... Untyped 11 (cptr=1a44) is of size 12. Placing in slot 21... Untyped 12 (cptr=1a45) is of size 14. Placing in slot 18... Untyped 13 (cptr=1a46) is of size 16. Placing in slot 15... Untyped 14 (cptr=1a47) is of size 19. Placing in slot 11... Untyped 15 (cptr=1a48) is of size 21. Placing in slot 9... Untyped 16 (cptr=1a49) is of size 20. Placing in slot 10... Untyped 17 (cptr=1a4a) is of size 19. Placing in slot 12... Untyped 18 (cptr=1a4b) is of size 18. Placing in slot 13... Untyped 19 (cptr=1a4c) is of size 17. Placing in slot 14... Untyped 20 (cptr=1a4d) is of size 16. Placing in slot 16... Untyped 21 (cptr=1a4e) is of size 13. Placing in slot 19... Untyped 22 (cptr=1a4f) is of size 12. Placing in slot 22... Untyped 23 (cptr=1a50) is of size 11. Placing in slot 23... Creating objects... ... Creating object conn1_mmio_frame_4261412864 in slot 6808, from untyped 1a3c... device frame, paddr = 0xfe000000, size = 12 bits Creating object conn1_mmio_frame_4261416960 in slot 6809, from untyped 1a3c... device frame, paddr = 0xfe001000, size = 12 bits Creating object conn1_mmio_frame_4261421056 in slot 6810, from untyped 1a3c... device frame, paddr = 0xfe002000, size = 12 bits ... Creating object vm_vm0_pre_init_ep in slot 10275, from untyped 1a3c... Creating object conn1_iospace_32 in slot 10276, from untyped 1a3c... <=== This is ignored! Creating object conn4_iport_760_767 in slot 10276, from untyped 1a3c... ... Populating slot 21 with cap to conn1_iospace_32... minting (with badge/guard 0x20)... <<seL4 [decodeCNodeInvocation/107 T0xe1ff3900 "rootserver" @804a911]: CNode Copy/Mint/Move/Mutate: Source slot invalid or empty.>> capDL-loader :: << Error: init_cnode_slot:1689: seL4_FailedLookup >>

2 1

Autocorres Error.
by Dan DaCosta 24 Jun '16

24 Jun '16

seL4 Developers: I apologize in advance if this is not the correct place for this email. I am experimenting with Autocorres as an intern at Rockwell Collin's Advanced Technology Center in Minnesota. My latest experiment is in building a small verified library for manipulation and analysis of adjacency lists. My initial work towards this end generated the following error: exception CTERM raised (line 948 of "~/development/rockwellcollins/verification/l4v/tools/autocorres/utils.ML"): autocorres: Internal var uu_::"int" is exposed. Please notify the AutoCorres maintainers of this failure. In the meantime, use "autocorres [keep_going]" to ignore the failure. I am using the latest version of Autocorres and Isabelle. The c and theory file that generated this error can be found here: https://github.com/chaosape/autocorresexperiments/tree/master/graph Thanks! Dan DaCosta

3 3

Resolving issue using camkes-vm with qemu
by Samuel Weiser 20 Jun '16

20 Jun '16

Hi, I just want to share some information which I needed to run camkes-vm with qemu, especially addressing one issue which prevented the guest vm to boot. I basically follow the recommendations of Adrian in [1] and only focus on the simple case without vt-d. 1. use the 'optiplex9020_onevm' configuration as it basically just specifies physical RAM. 2. enable nested KVM [2,3] 3. run QEMU with enough RAM: qemu-system-i386 -nographic \ -m 3GB \ -enable-kvm \ -cpu host \ -kernel images/kernel-ia32-pc99 -initrd images/capdl-loader-experimental-image-ia32-pc99 Following the above steps gives you a booting camkes vmm, however it fails to eventually activate Intel vt-x, needed to run the guest vm. The reason for that is that the seL4 kernel requires the IA32_FEATURE_CONTROL MSR to have VMXON enabled (bit 2) and locked (bit 0) (i.e. a value of 5). Normally, it's the job of the BIOS to do so, however I couldn't find an appropriate QEMU BIOS ROM which does so. The quick workaround is to enable VMXON within the seL4 kernel itself. The corresponding diff is attached. With this minor change, the recompiled kernel works like a charm. PS: One could consider making a separate option in Kconfig for that purpose. Best, Sammey [1] https://sel4.systems/pipermail/devel/2016-March/000717.html [2] http://www.rdoxenham.com/?p=275 [3] https://wiki.archlinux.org/index.php/QEMU#Enabling_KVM

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

Devel